Prices fall for PP, PE, PVC, PS and ABS

By Frank Esposito
Senior Staff Reporter

Published: November 3, 2011 6:00 am ET

Related to this story

Topics Materials, Suppliers

AKRON, OHIO (Updated Nov. 3, 3:30 p.m. ET) — Commodity resin prices are tumbling throughout North America, with polypropylene experiencing the steepest drop — a 14-cent dive since Oct. 1.

Regional prices for polyethylene, PVC, polystyrene and ABS also are down in recent weeks, according to buyers contacted by Plastics News. Drops in demand and in raw material prices were connected to all of these declines.

The PP swoon ends a two-month period in which prices were flat. Prices for the material had tumbled a total of 19 cents per pound in June and July. That drop came after the market was besieged by a total of 37 cents in increases from January through May.

The October decline means 34 of the 37 cents in increases have disappeared — and it reinforces the PP market’s reputation for extreme volatility.

North American PP demand has been soft for most of the year, and that weakness finally caught up with prices for propylene monomer feedstock, according to PP buyers contacted by Plastics News. Ongoing economic uncertainty caused sales of PP into areas such as consumer products — including furniture and housewares — to be down 10 percent through August, according to the American Chemistry Council in Washington.

Overall, North American PP sales were down almost 7 percent through August, with a 17 percent drop in exports worsening a drop of 6 percent in domestic sales. Buyers said an additional PP price drop in November is a strong possibility as the market moves into the traditionally slower fourth quarter.

The picture in the North American PE market is more blurry. After two flat months — and with demand slack at best — some buyers originally reported a 3-cent drop for October. That amount later changed to 5 cents, due in part to a report from a widely followed third-party pricing index.

Prior to the 3-to-5 change, a PE buyer in Texas said suppliers “are up in arms and viciously trying not to let the market go down the 5.” The Texas buyer added that PE makers were trying not only to stem the tide, but to reverse course and push through a 5-cent increase for November.

This tension was evident in an Oct. 24 letter to customers from PE maker Ineos Olefins & Polymers USA.

“We are aware that some third-party consultants have estimated the price to go down more than 3 cents per pound in October,” officials wrote. “We do not see this as representative of what is actually occurring in the market, and is an attempt to make the market as opposed to report on actual settlements.”

But the 5-cent drop eventually held, with buyers saying that PE makers Nova, ExxonMobil, Westlake, Formosa and Chevron Phillips all confirming the 5 around the same time.

Mike Burns, a PE market analyst with Resin Technology Inc. in Fort Worth, Texas, said the North American PE field was oversupplied in September and October, especially with demand checking in as average or weak.

“There was too much resin available at a low cost to produce,” he said.

Burns added that PE makers’ profit margins are tightening at a time when inventories are high, which should create a November market that he described as “interesting.”

U.S./Canadian PE demand has muddled its way through 2011. HDPE sales were up more than 1 percent through August, according to ACC, while sales of LDPE and LLDPE in that time frame were basically flat. For all three grades, drops in export sales damaged positive domestic growth rates.

PE price volatility for 2011 has been less extreme than that seen in PP. Prices climbed an average of 11 cents per pound – about a 14 percent increase based on dairy blow molding grades of HDPE - through April before falling an average of three cents in June and sliding another three in July.

Regional PVC prices slipped an average of 2 cents per pound in September and have ticked down another 2 cents since Oct. 1, according to buyers. Lower feedstock costs and slowing export growth played a role in the declines. The construction-led domestic PVC market remains weak — with sales off by almost 4 percent through August, according to ACC — but exports are up almost 26 percent.

Export sales made up about 36 percent of U.S./Canadian PVC sales through August, according to ACC. That’s up from 30 percent in the same period last year.

In solid and expanded PS, the 6-cent downtick occurred as demand slowed and prices for benzene – used to make styrene monomer feedstock – fell almost 17 percent in October to close at $3.33 per gallon. Another PS price decline for November is possible, as benzene already has closed down five percent to $3.15 per gallon for the month.

Lower prices for butadiene also played a role in lessening high-impact PS prices, according to RTI market analyst Stacy Shelly. Regional butadiene prices had peaked around $1.80 per pound earlier this year, but recently settled around $1.20, he said.

Regional selling prices for commodity ABS grades also were affected by lower demand and lower benzene and butadiene prices. Shelly said that lower-priced ABS resin from Asia now is making its way to North America, placing more downward pressure on pricing.

ABS prices had climbed about 20 percent between mid-2010 and mid-2011. Lower benzene prices for November also could increase the chances of more price drops, buyers said.


Comments

Prices fall for PP, PE, PVC, PS and ABS

By Frank Esposito
Senior Staff Reporter

Published: November 3, 2011 6:00 am ET

Post Your Comments


Back to story


More stories

Image

A. Schulman reports growth in sales and profit

October 22, 2014 7:58 pm ET

Executives with materials maker A. Schulman Inc. have to be smiling after seeing full results for the firm's 2014 fiscal year.    More

Image

PolyOne takes on LED lighting

October 22, 2014 4:23 pm ET

PolyOne Corp. is making inroads into LED lighting applications with its Therma-Tech-brand material technology.    More

Image

Sales, orders climbing for Wittmann Battenfeld

October 22, 2014 4:04 pm ET

Equipment maker Wittmann Battenfeld GmbH expects sales this year to increase 7 percent, to 295 million euros, as it said some key markets, including...    More

Image

Bergen International adds manufacturing space, extrusion line

October 22, 2014 3:42 pm ET

Chemical foaming agent manufacturer Bergen International LLC recently doubled its manufacturing capacity, added an extrusion line and laboratory...    More

Image

DuPont materials taking more ground in auto, medical, electronics

October 22, 2014 2:41 pm ET

Materials made by DuPont Co. are making inroads with products ranging from auto coolant pipes to circuit breakers to surgical devices.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events