APR study analyzes plastics from various bale types

Published: December 22, 2011 6:00 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Recycling

WASHINGTON (Dec. 22, 2 p.m. ET) — An analysis of seven different types of non-PET and HDPE plastic bales has found that more plastics are being recovered right now from bales of household containers and bottles, and from bales of bulky rigid plastics than from the other five types of mixed resin bales.

The bale audit survey conducted by the Association of Postconsumer Plastic Recyclers also found that those two types of mixed resin bales have the least contamination of the seven non-PET and HDPE bales analyzed.

“The whole intent was to determine once and for all what is in these seven types of bales ... to try and help expand plastic recycling beyond PET bottles and HDPE containers,” said APR executive director Steve Alexander. “We wanted to gather as much information as we could as to what is in these other bales.”

“Securing accurate estimates of the types, volume and destination of rigid plastic waste currently being recycled will strengthen and advance non-bottle rigid recycling,” Alexander said. “We wanted to develop information for plastic recyclers so they can determine what is the next best type of material or container to try and recycle.

“We want the information to help identify potential markets so recyclers can see if there is enough material in these bales for them to justify an investment in another wash line or another optical sorter,” Alexander said.

APR previously identified seven types of mixed resin bale types: bulky rigids, household bottles and containers, pre-picked bales, small containers, tubs and lids, all rigids and olefins. It has developed specifications for two of those seven bale types: bulky rigids and tubs and lids.

Among the survey’s finding:

• In pre-picked bales—that is, bales where material recovery facilities (MRFs) first pull out PET and HDPE bottles—bulky items constitute the majority of the remaining plastic, with polyethylene being the highest resin type followed by polypropylene.

• Bulky rigids account for 65 percent of the plastic items found in bulky rigid bales and are mostly made from PE and PP. Another 11 percent of those bulky rigid bales are containers and thermoforms.

• Bales of household bottles and containers contain 75 percent bottles, with PET being the highest resin type, followed by HDPE.

• Tubs and lid bales contain items made mostly of HDPE and PP.

• Bulky items and nursery pots are the two items found most in olefin bales, with the largest amount of items in olefin bales made from PP, then PE.

• Almost two-thirds, 64 percent, of what is found in small container bales are containers and thermoforms made from PP and PET. Another 23 percent are bottles.

• All-rigid bales are typically a combination of non-bottle containers, bulky rigid plastics, and bottles, with PE the most common resin followed by PP, PET and HDPE.

The survey examined 29 bales from 24 MRFs on the West Coast, East Coast, in the Midwest and in Canada, said APR.

“The greatest impact on bale quality and composition of recovered plastics is ... [the way MRFs] sort the plastics, and how well MRFs sort the plastics,” said the APR.

The 77-page study contains a breakout of each type of bale, sorted by product and resin categories and shows average percentage of each category in the bale. It appendix includes detailed sort data broken down both by bale type/product category and by bale type/ resin. It is available for purchase from APR.


Comments

APR study analyzes plastics from various bale types

Published: December 22, 2011 6:00 am ET

Post Your Comments


Back to story


More stories

Image

China's PVC exports face challenges

August 22, 2014 2:14 pm ET

Despite robust growth in the first half of the year, China's PVC exports now faces new challenges, due to trade barriers and new capacity ramping up...    More

Image

Westminster Tool creates academy to find, train future toolmakers

August 22, 2014 2:06 pm ET

Westminster Tool Inc. begins its own Westminster Academy to find and train skilled employees.    More

Image

Prosthetic arm concept wins in student thermoforming competition

August 22, 2014 1:56 pm ET

Pressure forming company Freetech Plastics Inc. has returned with its annual Student Thermoformed Part Competition, intended to expand the exposure...    More

Image

Composite bridge maker also leading the way in installation

August 22, 2014 1:21 pm ET

Lightweight, low maintenance and strong, fiber-reinforced polymer (FRP) bridge decks finally are crossing the line from specialty projects to wider...    More

Image

Reiloy Westland to build new headquarters

August 22, 2014 12:53 pm ET

Reiloy Westland Corp. will build a 45,000-square-foot headquarters factory, as the Kansas maker of screws and barrels expands under the ownership of G...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events