Century Mold expands in Tennessee and Mexico

By Michael Lauzon
Correspondent

Published: January 17, 2012 6:00 am ET

Related to this story

Topics Automotive, Medical, Injection Molding, Design, Molds/Tooling

ROCHESTER, N.Y. (Jan. 17, 3 p.m. ET) — Century Mold Co. Inc. is expanding in Tennessee and Mexico to keep up with its customers.

The Rochester, N.Y., firm, which is heavily involved in automotive injection molding, is seeing growth in its key market and in relatively new business areas, said Century Mold CEO and President Ron Ricotta, in a telephone interview.

“We’re seeing increased activity in the automotive market in the southeast,” Ricotta explained.

To meet rising demand, Century Mold has announced a $4.2 million expansion of its Shelbyville, Tenn., molding plant. In the first phase of the expansion Century Mold will add four new presses to Shelbyville’s current lineup of 30 injection molding machines, Ricotta said. As Shelbyville expands the site will add 58 jobs.

“The automotive industry in Tennessee is steadily growing and thriving,” stated Tennessee Department of Economic and Community Development Commissioner Bill Hagerty, in a news release.

“Some non-automotive business is also increasing,” Ricotta added. Two growing markets are electrical and gas-meter components, sectors recently cracked by Century Mold.

Growing automotive activity is spurring the firm to establish a second plant in central Mexico, in Queretaro, a hotbed for automotive, Century Mold also announced.

“Queretaro improves the size of our North American footprint to serve automotive,” Ricotta said in an interview from his Rochester office.

Century Mold is mainly a Tier 2 supplier, according to Ricotta. Automotive OEMs and their Tier 1 suppliers continue to locate in Mexico and Century Mold is following them.

The company plans to invest more than $15 million in Queretaro over the next 36 months. It is building a 100,000-square-foot facility to be completed in the fourth quarter of 2012. Production is slated to begin next January. Eventually the new plant will house 40 injection presses with 390 to 2,200 tons clamping force. Two-shot machines will be among the presses to be installed by 2016. Sales from the Queretaro business are projected to reach $40 million annually, Ricotta estimated.

Ricotta said Century Mold’s current Mexican plant in Chihuahua will remain open when Queretaro is on line. The Chihuahua operation is growing and its capacity is needed for Mexico’s markets.

Century Mold has weathered the ups and down of the automotive business better than many injection molders.

“We are heavily involved in engineering,” Ricotta explained. That means the firm has been able to take on additional responsibilities as its customers cut back on staff. The molder specializes in technically difficult, functional parts and assemblies.

“We are also financially sound and can invest in capital projects,” Ricotta added.

He said sales in 2011 at $100 million will swell to $110 million in 2012 and increase further to $125 million in 2013. Beyond these projections, the firm also is interested in acquisitions and starting new plants.

Century Mold has two committed customers for Queretaro and others are close to making commitments..

About 75 percent of Century Mold’s sales are automotive-related. Ricotta said three quarters of the vehicles assembled in North America have Century Mold-made parts. Its other important markets include defense, heavy truck, furniture and alternative energy. Its production units are in Rochester, Shelbyville, Middletown, Ohio, and Chihuahua, with a sales and technical center in Wixom, Mich. It mainly molds polypropylene, acetal and nylon, the firm states on its Plastics News injection molding survey form.


Comments

Century Mold expands in Tennessee and Mexico

By Michael Lauzon
Correspondent

Published: January 17, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Can plastics return to the driver's seat?

November 24, 2014 6:00 am ET

When the June 1989 issue of Popular Science introduced three cutting-edge automotive technologies, including the latest Corvette and a powerful...    More

Image

New GM purchasing chief faces big hurdles to improve supplier relations

November 24, 2014 11:11 am ET

Steve Kiefer is moving into the eternal hot seat that is head of GM global purchasing and supply chain.    More

Image

PET brought the water bottle revolution

November 24, 2014 6:00 am ET

The single-serve plastic water bottle is ubiquitous in today's culture. But that hasn't always been the case. Not by a long shot.    More

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events