Bayer unit puts EAP muscle into touchy-feely iPod app

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Related to this story

Topics Automotive, Medical, Consumer Products

LAS VEGAS (Jan. 31, 2:50 p.m. ET) — A subsidiary of Bayer MaterialScience LLC is exploring automotive and medical applications for its ViviTouch-brand actuator, now used in an external case for Apple Inc.’s fourth-generation iPod Touch device.

Demonstrations of the sound-and-vibration accessory drew positive attention during the Jan. 10-13 Consumer Electronics Show in Las Vegas. By itself, the iPod Touch does not support haptic, or sense of touch, feedback.

“We see electroactive polymers as a key material in developing components that translate electrical energy into movement in actuators and store energy in generators or sensors,” said Andrew Cheng, marketing director for the Bayer unit, Artificial Muscle Inc. of Sunnyvale, Calif. “Bayer is the first to commercialize EAP for the Mophie Pulse, a gaming device [controller] for the iPod Touch.” Mophie Inc. of Santa Ana, Calif., makes the Pulse.

Apple markets the case, with its textured gaming grip, for about $80. According to Apple, “it delivers pulse-pounding stereo sound and bone-shaking game feedback thanks to ViviTouch technology.” Originally, Artificial Muscle developed the actuator as a type of electrical motor for evaluating and monitoring muscle and tissue conditions.

A ViviTouch actuator consists of a thin layer of dielectric polymer film sandwiched between compliant electrodes, according to Artificial Muscle. When voltage is applied across the electrodes, the electrodes attract each other and the film contracts in thickness and expands in area.

The technology is particularly suited for small, battery-powered mobile applications such as Smartphones, gaming consoles, remote controls and gaming controllers, Cheng said. “These actuators are used to move an inertial mass, such as the battery inside the device, and according to a specific haptic control signal.”

Software developers can enhance their games and applications with ViviTouch’s small and lightweight characteristics and the “ability to achieve significant motion with less power, fast response times and nearly silent operation volume,” Cheng said.

“ViviTouch can reproduce any audio or vibration waveform and thus our ‘high-definition feel’ is perceived as more realistic to the consumer,” Cheng said, citing user studies.

Apple’s hard-shell Mophie Pulse has a soft-touch grip, integrated speakers and low-profile access to the controls.

 “Our patent portfolio covers the complete EAP base technology, including a broad range of disruptive approaches that can replace electrical motors and generators,” Cheng said. “While we are focused on the mobile gaming industry as an entry into the consumer electronics market, down the road we can certainly apply this to automotive and medical applications.”

Artificial Muscle unveiled the ViviTouch at CES 2011.

Bayer MaterialScience of Pittsburgh acquired Artificial Muscle in March 2010.

See other stories in the Plastics in Electronics Special Report:

Ever-dwindling demand for  PCs offset somewhat by small devices

Cell phone makers look to Asia for sales

Dow additive keeps PC from scratching


Comments

Bayer unit puts EAP muscle into touchy-feely iPod app

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Visteon in talks to sell its stake in Halla Visteon Climate Control JV

November 26, 2014 9:07 am ET

Visteon Corp. confirmed this morning that it is in discussions with a private equity firm to sell its stake in South Korean joint venture Halla...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

AMA Plastics adds presses, changes management structure

November 24, 2014 3:57 pm ET

AMA Plastics Inc. has strengthened its management structure, received recognition for entrepreneurship, achieved quality improvements and added three ...    More

Image

Indiana injection molder PRD expands

November 24, 2014 1:56 pm ET

Automotive supplier PRD Inc. is expanding its manufacturing facility in Springville, Ind.    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events