Bayer unit puts EAP muscle into touchy-feely iPod app

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Related to this story

Topics Automotive, Consumer Products, Medical

LAS VEGAS (Jan. 31, 2:50 p.m. ET) — A subsidiary of Bayer MaterialScience LLC is exploring automotive and medical applications for its ViviTouch-brand actuator, now used in an external case for Apple Inc.’s fourth-generation iPod Touch device.

Demonstrations of the sound-and-vibration accessory drew positive attention during the Jan. 10-13 Consumer Electronics Show in Las Vegas. By itself, the iPod Touch does not support haptic, or sense of touch, feedback.

“We see electroactive polymers as a key material in developing components that translate electrical energy into movement in actuators and store energy in generators or sensors,” said Andrew Cheng, marketing director for the Bayer unit, Artificial Muscle Inc. of Sunnyvale, Calif. “Bayer is the first to commercialize EAP for the Mophie Pulse, a gaming device [controller] for the iPod Touch.” Mophie Inc. of Santa Ana, Calif., makes the Pulse.

Apple markets the case, with its textured gaming grip, for about $80. According to Apple, “it delivers pulse-pounding stereo sound and bone-shaking game feedback thanks to ViviTouch technology.” Originally, Artificial Muscle developed the actuator as a type of electrical motor for evaluating and monitoring muscle and tissue conditions.

A ViviTouch actuator consists of a thin layer of dielectric polymer film sandwiched between compliant electrodes, according to Artificial Muscle. When voltage is applied across the electrodes, the electrodes attract each other and the film contracts in thickness and expands in area.

The technology is particularly suited for small, battery-powered mobile applications such as Smartphones, gaming consoles, remote controls and gaming controllers, Cheng said. “These actuators are used to move an inertial mass, such as the battery inside the device, and according to a specific haptic control signal.”

Software developers can enhance their games and applications with ViviTouch’s small and lightweight characteristics and the “ability to achieve significant motion with less power, fast response times and nearly silent operation volume,” Cheng said.

“ViviTouch can reproduce any audio or vibration waveform and thus our ‘high-definition feel’ is perceived as more realistic to the consumer,” Cheng said, citing user studies.

Apple’s hard-shell Mophie Pulse has a soft-touch grip, integrated speakers and low-profile access to the controls.

 “Our patent portfolio covers the complete EAP base technology, including a broad range of disruptive approaches that can replace electrical motors and generators,” Cheng said. “While we are focused on the mobile gaming industry as an entry into the consumer electronics market, down the road we can certainly apply this to automotive and medical applications.”

Artificial Muscle unveiled the ViviTouch at CES 2011.

Bayer MaterialScience of Pittsburgh acquired Artificial Muscle in March 2010.

See other stories in the Plastics in Electronics Special Report:

Ever-dwindling demand for  PCs offset somewhat by small devices

Cell phone makers look to Asia for sales

Dow additive keeps PC from scratching


Comments

Bayer unit puts EAP muscle into touchy-feely iPod app

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ford's final ACH plant, injection molder of HVAC systems, to close

October 22, 2014 1:58 pm ET

Ford Motor Co. will shed the last line of business in 9-year-old Automotive Component Holdings LLC by December when ACH closes its Plymouth, Mich.,...    More

Image

BASF targets coffee and automotive connoisseurs with new resin grades

October 21, 2014 2:07 pm ET

BASF SE is using polybutylene terephthalate (PBT), which is normally used to manufacture high-end electronics, in a food consumer packaging product.    More

Ford shrinks its supplier 'watch list'

October 20, 2014 1:35 pm ET

Ford purchasing chief Hau Thai-Tang says suppliers are starting to invest in additional production capacity because they think the recovery is real.    More

Image

Plastikon expanding in Kentucky

October 17, 2014 11:24 am ET

Automotive supplier Plastikon Industries Inc. plans to more than double the size of its production facility in Leitchfield, Ky.    More

Image

Chrysler's Busse has a surprise for you

October 16, 2014 6:00 am ET

Chrysler Group's interior design chief Klaus Busse and his team enjoy hiding what they call "Easter eggs" throughout Chrysler Group vehicles for owner...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events