Dow additive keeps PC from scratching

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Related to this story

Topics Consumer Products, Materials, Suppliers

MIDLAND, MICH. (Jan. 31,  2:15 p.m. ET) — Dow Chemical Co. plans to introduce an anti-scratch additive for compounding with polycarbonate to compete with ultraviolet-light-cured PC hard coatings.

“The solution eliminates a hard coating and cuts the cost by half to obtain a hardened PC,” Arthur Chiu, global marketing and asset director for Dow’s plastics additives business, said in a recent telephone interview.

While PC has “great intrinsic properties [including] temperature resistance, toughness and even clarity,” Chui noted, it has poor scratch resistance and needs a hard coating — usually an acrylic monomer — to maintain its glossy appearance.

After learning that some customers didn’t like hard coatings, Dow set about developing a solution, by working on a proprietary basis with numerous electronics and automotive customers. Dow intends to unveil the anti-scratch additive technology during Reed Exhibitions Ltd.’s Plastic Japan show, April 11-13 in Tokyo, and Adsale Exhibition Services Ltd.’s Chinaplas show, April 18-21 in Shanghai.

Dow plans to commercialize the product, probably during the second half of 2012. Multiple Dow locations will manufacture the additive.

Potential applications for additive-enhanced PC include electronic-device housings and touch screens, automotive components such as knobs and dashboards, and eyeglass optics.

In the past, the Dow’s plastics additives business focused mostly on PVC applications. Over the decades, resin additives have helped make PVC tough, colorfast and processable, according to Chiu.

“We do sell some existing products into electronics and automotive where PVC is not used,” Chiu said. “In the last year or two, we in plastics additives have renewed our focus on markets including the electronics materials business.”

In addition to PVC and soon PC, Dow’s plastics additives business supplies packaging, building and construction and engineering materials for compounding with polyester, other engineering thermoplastics, their alloys and polylactic acid.

Midland, Mich.-based Dow declined to identify or discuss competitors, but industry players in various aspects of supplying or manufacturing hard coatings include Advanced Polymer Solutions LLC of Port Washington, N.Y.; Bayer MaterialScience AG of Leverkusen, Germany; Cytec Industries Inc. of Woodland Park, N.J.; Evonik Industries AG of Essen, Germany; Mitsui Chemicals Inc. of Tokyo; Momentive Performance Materials Inc. of Wilton, Conn.; Plaskolite Inc. of Columbus, Ohio; and Tekra Corp. of New Berlin, Wis.

See other stories in the Plastics in Electronics Special Report:

Ever-dwindling demand for  PCs offset somewhat by small devices

Cell phone makers look to Asia for sales

Bayer unit puts EAP muscle into touch-feely iPod app


Comments

Dow additive keeps PC from scratching

By Roger Renstrom
Correspondent

Published: January 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Citadel opens second compounding facility in China, near Shanghai

January 27, 2015 3:22 pm ET

Citadel Plastics Inc., the American manufacturer of thermoplastic and engineered composite compounds, has opened its second facility in China,...    More

Image

Sales, profit fall at DuPont

January 27, 2015 3:13 pm ET

Materials giant DuPont Co. will use almost all of the proceeds from an upcoming spinoff — one that includes its fluoropolymer and titanium...    More

Image

A. Schulman, Citadel continue buying blitz

January 27, 2015 11:32 am ET

A. Schulman Inc. and Citadel Plastics Inc. — two deal-happy materials firms — were at it again in the second half of 2014.    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Image

Materials market sees more deals

January 27, 2015 11:26 am ET

Plastics materials deals showed modest growth in 2014, increasing 6 percent vs. their 2013 total.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events