Indian group, two U.S. schools, to build plastics university

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: February 3, 2012 6:00 am ET

An aerial representation of the proposed PlastIndia International University, to be based in Vapi, India (SWA Group illustration)

Related to this story

Topics Public Policy

NEW DELHI (Feb. 3, 12:50 p.m. ET) — India’s largest plastics trade association and two American universities with prominent plastics engineering and material science programs signed an agreement Feb. 3 to help build an international-level university for polymers in western India. 

The agreement with the two American schools, the University of Massachusetts-Lowell and the University of Wisconsin, is a step forward for the plans of the Mumbai-based Plastindia Foundation to build a university-level program educating several hundred engineers a year.

But to become reality, foundation representatives said they still need to raise most of the $30 million needed to fully build out their vision, to be called Plastindia International University.

The foundation will kick in about $6 million to start work, with the rest coming from private fundraising yet to be done by the country’s plastics sector, according to Plastindia Foundation President Ashok Goel, speaking at the signing ceremony held during the Plastindia trade show.

Still, he predicted that the first phase of the university will be able to open by 2014 or 2015, at its 50-acre campus in the city of Vapi, Gujarat state, near Mumbai. Gujarat is one of India’s major centers for plastics manufacturing.

“We have made good progress,” he said. “We have the master plan done and we have the partners identified. The land is in our possession.”

Goel, who is also vice chairman and managing director of Mumbai-based packaging firm Essel Propack, said officials have yet to decide what exactly will be included in the first phase and what would be built in later phases.

The project will be entirely privately financed, he said.

The American universities are not putting in money but will help develop curriculum to international standards.

Stephen Driscoll, professor in U-Mass Lowell’s Department of Plastics Engineering, said the university hopes its collaboration with the PIU will ultimately draw more students to its campus in Massachusetts.

Lowell officials said they have strong ties to India historically, noting that India contributes more students to the campus than any other foreign country.

Lowell is one of the more prominent plastics engineering programs in the United States. An official from Wisconsin’s plastics program said the university was the first in the world to offer a course in plastics engineering, in 1946, and sees this as a unique chance to help build a new program.

“It’s fun to see the progress of plastics education around the world,” said Tim Osswald, co-director of the university’s Polymer Engineering Center. “Probably for all of us our first love is teaching and education. This is an opportunity to start something from the ground up with very capable partners.”

Plastindia officials said they sought out American universities, rather than partner with Indian schools, because the Indian educational system produces graduates with theoretical knowledge but not enough experience applying the knowledge.

Goel, in a speech at the ceremony, said the PIU will seek certification under the state of Gujarat, rather than the national system in India, because national rules are unclear and Gujarat is offering more flexibility.

“We can have some sort of autonomy in designing the courses,” he said.

Hemant Minocha, director of masterbatch maker Rajiv Plastics Ltd. in Mumbai, said the Indian university system is too focused on theory, forcing companies to spend the first year or more training its new engineers. He said in an interview at the ceremony that he wants a more practical approach from universities.

“I don’t get anyone straight out of university in India with practical experience,” said Minocha, who earned a master degree in plastics engineering at U-Mass Lowell in 1998. “The kind of exposure we got from U-Mass., there is nothing that equals that.”

Goel said the PIU in time wants to add master and doctorate programs. Its engineering courses will include a strong management component, and the PIU wants to bring in another partner university to help design a formal management program, he said.

Plastindia employed American architectural firm SWA Group to prepare preliminary designs, and in a presentation at the ceremony, an SWA architect showed a potential campus design for 2,000 students, with housing for students and staff, and that would use green practices such as rainwater harvesting and water recycling.


Comments

Indian group, two U.S. schools, to build plastics university

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: February 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

California Assembly passes plastic bag ban

August 28, 2014 3:07 pm ET

In its second attempt of the week, the California Assembly approved a bill that would ban single-use plastic bags statewide, the first such ban in...    More

Image

DuPont fined for 2010 chemicals release

August 28, 2014 1:37 pm ET

DuPont Co. has been fined almost $1.3 million for the release of several chemicals — including plastics feedstock phosgene — at its plant ...    More

Image

Pregis, Sealed Air settle film-foam patent dispute out of court

August 28, 2014 1:01 pm ET

A couple of packaging companies are settling their patent fight over film-foam underlayment.    More

Image

Truce? ACC, US Green Building Council agree to work together on LEED

August 28, 2014 12:08 pm ET

The American Chemistry Council (ACC) and the U.S. Green Building Council (USGBC) announced Aug. 27 that they will be working together on a new...    More

Image

Baxter may be looking for a Boston home

August 28, 2014 11:46 am ET

As Baxter International Inc. may be staking out real estate in the Boston area for its headquarters, Illinois faces the prospect of having to dangle t...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events