Italian and Indian rotomolding toolmakers strike partnership

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: February 3, 2012 6:00 am ET

Related to this story

Topics Mergers & Acquisitions, Rotomolding, Molds/Tooling

NEW DELHI (Feb. 3, 12 p.m. ET) — Italian mold maker Roto Moulds srl and M. Plast (India) Ltd. have signed a technology transfer agreement to boost the Indian firm’s capabilities and use it as a base to tap into new markets like the Middle East and Africa.

The two companies, both relatively small mold making shops focused on the rotomolding industry, made the announcement at a January 30 conference in New Delhi and said their partnership could be expanded into a formal equity joint venture if business goes well.

“There are a lot of areas we would like to develop together, like the Middle East and Africa,” said Terzi Manuel, an owner and managing partner of Milan-based Roto Moulds. “[Companies there] want to buy with a good price and good quality. At the moment they can’t find it anywhere.”

The companies did not disclose terms of the arrangement, although they said it will focus on steel and stainless steel molds.

As part of the agreement, the companies will spend the next two months in intensive staff training, with Roto Moulds sending technicians to India to train M. Plast personnel, and M. Plast staff traveling to Italy, said Rajendra Shukla, director of Noida, India-based M. Plast.

The deal will let M. Plast improve quality to meet increasing demands in India’s market, and give both companies a more globally competitive platform than they can have separately, said Shukla, speaking in a joint interview with Manuel at the 2012 annual conference of the Society of Asian Rotomolders, held Jan. 29-31 in New Delhi.

“For us it’s a quality issue – for them it’s a cost issue,” he said.

The firms could see “considerable” cost savings from the Indian-made molds, but won’t know details until the partnership starts working, Shukla said.

One particular area of focus, he said, will be on underground septic or water storage tanks, a rapidly growing market in India and one where the Italian firm already has a lot of experience.

Both firms said it was also unclear many molds they would make from the partnership, although Shukla said the companies believe in time they could make 200 molds per year, roughly equal to M. Plast’s current production.

Manuel said the firms are both thinking about deepening the partnership: “When we arrive at a certain level the goal for both is to go to a joint venture.”

“What we signed is an agreement that we bring here in India our technology to produce a better quality mold,” he said. “On the other hand, for us it would be… an extension of production here in India with a lower price than what we have in Italy.”

He said Roto Moulds has tried to sell into the Middle East and Africa but found its molds were too costly.

The Italian firm said it could export tools from India to Europe but said that many of its European customers prefer their tools to be built nearby for better service.

The companies only met about two months ago, introduced by Indian-American rotomolding executive Ravi Mehra, managing director of mold maker Norstar International, LLC, in Cedarburg, Wis.

It’s not the first time playing corporate matchmaker for Mehra, who is also the founding chairman of the New Delhi-based Society of Asian Rotomolders and active in rotomolding trade groups globally.

Mehra was instrumental in the 2007 strategic alliance between New Delhi-based OK Play India Ltd. and Solar Plastics Inc. in Delano, Minn.

Norstar and M. Plast also signed their own strategic cooperation in 2007 for M. Plast to license Norstar’s technology to build aluminum molds in M. Plast’s factories.

Shukla said they hope within a year to install equipment for casting the aluminum molds in a new factory in Noida. The project has been delayed finding the right staff for that specialized process, he said.


Comments

Italian and Indian rotomolding toolmakers strike partnership

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: February 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Huhtamäki selling film division

November 26, 2014 2:10 pm ET

Private equity firm Deutsche Beteiligungs AG (DBAG) will acquire the film business of Finland-based plastics packaging group Huhtamäki Oyj for 141...    More

Image

Visteon in talks to sell its stake in Halla Visteon Climate Control JV

November 26, 2014 9:07 am ET

Visteon Corp. confirmed this morning that it is in discussions with a private equity firm to sell its stake in South Korean joint venture Halla...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

Onex buying packaging group SIG Combibloc

November 24, 2014 9:05 am ET

ex Corp. will buy SIG Combibloc Group, the Switzerland-based manufacturer of aseptic carton packaging and plastics closures from New Zealand's Rank...    More

Image

3D Systems buying Cimatron

November 24, 2014 1:46 pm ET

3D Systems Corp. is buying Cimatron Ltd., an Israel-based company that makes integrated computer-assisted design and manufacturing software, for $97 m...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events