Cleveland recycler looking at growth in 2012

Dan Shingler

Published: February 7, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Recycling, Suppliers

CLEVELAND (Feb. 7, 1:15 p.m. ET) — Some folks start a business on a credit card, but T.R. Mitchell says he started his with gift cards — millions of them.

The co-founder of New Wave Plastics in Cleveland established his company in 2007 by recycling the cards after they’d been used by customers of Starbucks and other retailers and service companies. He said he liked the business model because the initial challenge was not to make sales, but to find raw materials.

Gift cards, hotel room keys, credit cards and other cards must be made of a particular kind of printable plastic, and more companies have sought to use recycled plastic in recent years. As a result, every bit of old plastic card stock that Mitchell finds can be sold to the plastic companies that resell it to the printers and their end users.

“Our orders are set for the year,” Mitchell said, noting that his challenge now is to find as much of the plastic as possible to fill them. “In the recycled plastics world, you have limited supply.”

That business has been a springboard for Mitchell’s company, which he started in Medina. Last year, it outgrew its initial 20,000-square-foot Medina plant and, in early 2011, it moved to new, larger digs in Cleveland, where it took over about 120,000 square feet of manufacturing space on Walworth Avenue.

Today, however, recycling cards has

become only a fraction of New Wave’s business, even though it recycled more than 4 million of the cards last year. It also has branched out into recycling all sorts of other plastics, Mitchell said.

“At one point, (card recycling) was about 98 percent of our business. Now, it’s about 5 percent,” Mitchell said.

Among the other types of plastic New Wave recycles are those used by injection molders such as Thogus Products in Avon Lake, Ohio.

The presence of a reliable vendor such as New Wave that will pick up all its scrap enables Thogus to get at least some cash from what otherwise would be trash, said Thogus spokeswoman Dana Foster.

“They’re a great resource to us as a manufacturer,” Foster said. “They take all our scrap and pick it up on time.”

Now, New Wave’s challenge is to expand and use its new space efficiently. To do so, Mitchell said, he’ll likely spend about $1 million this year on new equipment to grind up, process and repelletize the plastic he recycles. He’d have done it in 2010 or 2011, he said, but credit was harder to come by.

The company has room to grow, both physically and financially, Mitchell said.

It’s only using about 65,000 square feet of its current building and has another 55,000 square feet it can occupy as soon as it has the equipment and raw materials to fill it. It’s also expanding elsewhere. Last October, it opened a recycling center in Florida.

But the company still is committed to growing in the city of Cleveland, Mitchell said, and it’s involved in local endeavors such as the Manufacturing Mart that opened in the Galleria downtown in 2010.

Manufacturing Mart President Mary Kay Denning has been working with Mitchell to help him get more raw materials by working with other manufacturers on sustainability issues that include managing their waste stream. Mitchell said those connections already have brought in about $500,000 of plastics he otherwise would not have secured.

Denning said New Wave not only is helping other manufacturers to be more green, but also is profiting in the process.


Comments

Cleveland recycler looking at growth in 2012

Dan Shingler

Published: February 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Coffee roaster looks to improve footprint of single cup systems

April 22, 2014 1:30 pm ET

One of the largest coffee and tea manufacturers in North America has introduced a single-serve beverage capsule intended to curb the waste created by ...    More

Image

HRS adding more North American production for hot runners

April 22, 2014 12:57 pm ET

An Italian tooling component supplier is set to open a new production plant in Grand Rapids, Mich. The HRS Flow Division of San Polo di Piace-...    More

Two Eastman buildings among 10 biggest energy savers in national contest

April 22, 2014 11:35 am ET

Two offices at the headquarters of Eastman Chemical Co. in Kingsport, Tenn., ranked in the Top 10 for energy efficiency in the latest Energy Star...    More

Europe's bag use still expected to climb despite possible bag restrictions

April 22, 2014 9:29 am ET

Ceresana, a Germany-based research company, has released a report forecasting that by 2020 the sales volume of bags and sacks in Europe will reach 9....    More

Image

Material Insights: Shell Chemical meets with residents

April 21, 2014 2:16 pm ET

Power outage at a PE plant and the return of a PVC feedstock plant after a fire on this week's Material Insights.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events