Filter dust collector prevents pump fouling

Published: March 14, 2012 6:00 am ET

Related to this story

Topics Product News

Novatec Inc.’s Filter Dust Collector units provide a higher level of vacuum pump protection than standard cyclone dust collectors.

Three polytetrafluoroethylene (PTFE) coated cartridge filters are 99 percent efficient down to 1 micron. Jim Zinski, Novatec’s senior vice president of system design, said the remove more fines than standard cartridge filters, while minimizing clogging.

FDC Series 50 and 124 are suitable for us with conveying lines from two to four inches outside diameter. Filter areas are 15 to 24 percent larger than competitive models.

The cartridge filters separate the dust from the airstream, allowing maximum dust release and minimizing the amount of particles that remain on the cartridges. An internal material deflector/flapper check valve deflects incoming material away from the filters.

Fines are emptied via a quick-disconnect catch bin with cradle support.

Novatec is based in Baltimore.

Tel. 410-789-4811, fax 410-789-4638, email sales@novatec.com.


Comments

Filter dust collector prevents pump fouling

Published: March 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Extruder maker touts advantages of modular design

April 9, 2014 11:46 am ET

KraussMaffei Berstorff extends its line of compounding extruders with the cost-effective ModulPlus variety.    More

Profile extrusion system saves material and energy

April 9, 2014 11:39 am ET

Profile extrusion technology supplier Greiner Extrusion of Nussbach, Austria, has a new innovation: Its flow.control pro using GESS.tronic, which...    More

Structural foam retrofit includes sequential valve gating

April 9, 2014 11:21 am ET

Cincinnati Process Technologies did a controls retrofit project for a structural foam molding machine for Buckhorn Inc.’s factory in Bluffton,...    More

Software helps Schnipke speed up mold trials

April 9, 2014 11:20 am ET

Schnipke Engraving Co. of Ottoville, Ohio, has seen a major improvement in speed in its design-to-part process by using the Sigmasoft thermoplastic...    More

Mold with five-piece collapsing core makes cosmetic jars

April 9, 2014 11:18 am ET

StackTeck Systems Ltd. of Brampton, Ontario, has announced a new application for its five-piece collapsing core for high-volume jars: with a mold sold...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events