Milacron gets new private equity owner

By Bill Bregar
Senior Staff Reporter

Published: March 30, 2012 6:00 am ET

Related to this story

Topics Mergers & Acquisitions, Injection Molding, Blow Molding, Film & Sheet, Machinery, NPE 2012

CINCINNATI (March 30, 11:25 a.m. ET) — Milacron LLC, the only U.S.-based broad-line manufacturer of primary plastics equipment, will get a new private-equity owner — in news announced just before NPE2012.

Avenue Capital Group will sell the Cincinnati-based Milacron to CCMP Capital Advisors LLC, under an agreement announced March 30. The transaction is expected to close in the second quarter of 2012. Both private equity firms are based in New York.

NPE runs April 1-5 in Orlando, Fla.

Terms were not disclosed. Avenue Capital and three other investment firms bought Milacron out of Chapter 11 bankruptcy in 2009 for $175 million.

Milacron generated about $780 million in sales for 2011, more than 20 percent higher than 2010, officials said. The Cincinnati-based machinery maker employs 2,848 people around the world. The company has factories in the United States, Germany, India and China

In southwestern Ohio, Milacron employs 805 people at its main assembly plant in Batavia and machining plant in Mount Orab.

Milacron makes injection presses, blow molding machines, extruders, structural foam machines, mold components and industrial fluids used in metal cutting.

Milacron filed for Chapter 11 on March 10, 2009, suffering from a liquidity crisis under substantial debt. Five months later, Milacron emerged with the new ownership, as a private company. Avenue Capital later bought out the other investors to become sole owner.

Milacron reorganized its balance sheet, shedding more than $500 million in liabilities. Avenue Capital officials said Milacron reinvested about $40 million into the company in equipment and research and development in 2010 and 2011.

At the same time, the machinery market has rebounded strongly from a punishing recession.

“Today Milacron’s growth prospects are stronger than ever,” Milacron CEO Dennis Smith said in a news release. “With renewed financial stability and CCMP’s support, we expect to continue to expand our market share, extend our global reach and invest in technologies to meet our customers’ needs around the world over the long term.”

Smith said the sale “reflects the positive progress and the strength of the company.”

Economist Bill Wood expects more machinery companies to change hands, given strengthening equipment demand and very low interest rates for financing deals.

“At this point in the business cycle, I think there will be some more of this activity. The horizon looks very different than it did a year ago. The numbers I’ve seen for plastics machinery look pretty robust,” said Wood, who runs Mountaintop Economics and Research in Greenfield, Mass.

CCMP Capital Advisors specializes in upper-middle market buyouts and equity investments of $100 million to $500 million in the United States and Europe.

Tim Walsh, managing director of CCMP and co-head of its industrials group, said the firm will help Milacron execute its plans for growth.

“Through its high-quality plastics processing equipment and industrial fluids products, attention to customer service and strong strategic leadership of Dennis and his team, we believe Milacron is very well positioned to continue growing around the world and particularly in North America and emerging markets,” Walsh said in the release.

CCMP and Milacron said Milacron’s management team will continue with the company, which will remain headquartered in Cincinnati.

CCMP Capital Advisors has invested $13 billion in buyout and equity transactions since 1984. The firm targets consumer /retail and media, industrial, energy and healthcare.

On the industrial side, in the past, CCMP has been an investor in Berry Plastics Corp., Kl"ckner Pentaplast GmbH, Kraton Polymers and M&H Plastics Ltd.


Comments

Milacron gets new private equity owner

By Bill Bregar
Senior Staff Reporter

Published: March 30, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

MGS buying N.Y. medical molding plant from Hospira

April 17, 2014 10:19 pm ET

MGS Manufacturing Group is purchasing the Buffalo, N.Y., injection molding facility and related product line of Hospira Inc., effective July 1. Terms ...    More

Image

Navigating the rough seas of selling your company

April 17, 2014 2:47 pm ET

For family owned plastics firms who survived the Great Recession, many wonder: Is it time to sell, retire and sip cocktails on the beach? Or, maybe...    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Spain's Cristian Lay Group buys two materials units of bankrupt LSB

April 17, 2014 11:11 am ET

Spanish industrial conglomerate Cristian Lay Group has purchased two of the bankrupt Spanish PET packaging group La Seda de Barcelona.    More

EU moving closer to rules that will reduce plastic bag use by 80 percent

April 17, 2014 10:54 am ET

European Union countries could have to reduce the use of plastic shopping bags by at least 80 percent by 2019 under draft rules backed by the European...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events