Sabic's Keith Smith brings big expectations to NPE2012

By Frank Esposito
Senior Staff Reporter

Published: April 1, 2012 6:00 am ET

Smith

Related to this story

Topics Sustainability, Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 1, 8:45 a.m. ET) — Keith Smith has been at his new job for less than six months, but he already likes what he sees at Sabic Innovative Plastics.

“This is an industry that I’ve been in for quite a while, and one that I absolutely love,” Smith said in a recent phone interview. “Over the years, I knew that Sabic and GE Plastics had a unique portfolio, and that was something I admired. I also admired their people, and the time I’ve been here has reinforced that.”

At NPE2012, Sabic (Booth 29000) is taking an aggressive approach to a show Smith described as “a huge opportunity.”

“NPE is the largest plastics show in North America, and as a committed leader in the industry, we’re going to show and show big,” he said of the exhibition in Orlando, Fla.

Smith may be new to Pittsfield, Mass.-based Sabic IP, but he’s no stranger to the world of plastics. Before becoming the firm’s executive vice president Dec. 1, he spent more than 30 years with plastics and chemicals leader DuPont Co., most recently serving as the firm’s vice president for sourcing and logistics.

While at Wilmington, Del.-based DuPont, Smith ran businesses that competed with Sabic in some areas, but he said there wasn’t a lot of overlap between DuPont’s crystalline materials and Sabic’s mostly amorphous ones.

“Sabic is clearly a company that’s committed to this industry in many different ways,” Smith said. “But the most important part is people, and that’s driving us to be the employer of choice.”

Sabic ranks as one of the world’s largest producers of polycarbonate, ABS and other engineering resins, such as its Ultem-brand polyetherimide and Noryl- brand polyphenylene oxide/poly­phenylene ether resins.

“We’re still looking to replace metals, glass and other plastics,” Smith said. “Analysts have said that PC and ABS can do 1½ times [gross domestic product] growth annually. There’s a continued value proposition for our materials for a number of reasons, including weight reduction.”

Recent growth for Sabic materials has come from the rebound of the auto sector, both in North America and around the world. Smith said North American auto builds could be up as much as 7 percent this year, creating “multiple substitution opportunities for our products.”

Electronics market growth also has helped Sabic recently, in products such as appliances and flat-screen TVs. But Smith pointed out that the electronics market is “a bit more volatile than some others, with higher highs and lower lows.”

The 1½ times GDP multiple works out to about 5 percent for both PC and ABS. Analysts have said those numbers will be lower in North America, but Smith added that Sabic’s expectations “are higher than that.”

A recently opened pilot plant in Mount Vernon, Ind., will allow Sabic to “tweak the backbone” of Ultem-type products, Smith said. The company had done previous work to explore PC.

Sabic also is opening a compounding plant in western China and recently signed a joint venture agreement with Chinese state-owned petrochemicals firm Sinopec to open a new PC plant there in 2015. Sabic also recently opened innovation centers in China and India and is adding to its product portfolio with materials like acrylic resin and carbon fiber.

“Our top priority is to continue to drive actionable commitments that people are going to see from Sabic in the industry,” Smith said. “We’re not just saying we’re committed — we’re showing it with actions.”


Comments

Sabic's Keith Smith brings big expectations to NPE2012

By Frank Esposito
Senior Staff Reporter

Published: April 1, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Haitian's standardization efforts paying off

August 29, 2014 9:53 am ET

Streamlined design efforts and robust export sales helped propel Ningbo, China-based injection molding machine manufacturer Haitian International...    More

Image

Updating a travel icon for the professional millennial

August 29, 2014 11:44 am ET

As part of a drive to expand its customer base to include more millennials, Airstream Inc. turned to the Columbus College of Art & Design's...    More

Image

American Starlinger-Sahm begins work on new US headquarters

August 29, 2014 10:18 am ET

American Starlinger-Sahm Inc., which sells equipment for woven plastic bag production, PET recycling equipment, sheet extrusion and laminating lines...    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and Ch...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events