Husky's goal: thinner parts, faster machines

By Bill Bregar
Senior Staff Reporter

Published: April 2, 2012 6:00 am ET

Related to this story

Topics Injection Molding, Machinery, Molds/Tooling

ORLANDO, FLA. (April 2, 8:30 p.m. ET) — Husky Injection Molding Systems Ltd. (Booth 3763) is not done pushing the envelope of thinner and faster, when it comes to packaging and medical molding.

A Husky official also said the company would break ground on a new plant in China.

At NPE2012, Husky is rolling out the latest generation of its HyCAP beverage closure maker, cranking out a water bottle closure at a 2.2 second cycle using a 96-cavity closure mold made by KWT Group, the Austrian closure mold specialist that Husky bought last year.

Jeff MacDonald, vice president of marketing, said Husky can squeeze out the cycle times because the company makes the molding press, hot runners and—now in closures—the mold.

The press running caps in Orlando represents a 45 percent improvement in productivity over the first HyCAP, at the last NPE in 2009, which ran a 72-cavity system running a similar application on a 2.4 second cycle. It’s a single-faced mold, not a stack mold. MacDonald said Husky said the market is moving away from stack molds for closures. “We’re finding the average cavitation’s coming down a little bit,” he said as Husky’s press conference April 2.

And Husky will go one step further at Chinplas, coming up April 18-24 in Shanghai, debuting the HyCAP HPP (for high performance package), which the company claims will be the world’s fastest closure system.

MacDonald said the press, which is already in China for the show, trims cycle time even more. The goal for Husky engineers was to reduce the mold open and close and make other improvements, to boost productivity and energy efficiency both by 20 percent, he said.

At NPE2012, Husky also is running an all-electric H-MED AE press with UltraSync hot runner technology, Shotscope NX to cut energy use and boost productivity, and an Altanium temperature controller. The H-MED is molding an IV breather cap.

MacDonald said Husky will break ground on a plant in the Shanghai area. He declined to give many details, but said it would do some manufacturing of hot runners and injection presses.

Husky opened its Asian headquarters plant in Shanghai in 2004, and followed up with a hot-runner plant in Shenzhen the following year.

Earlier this year, Husky opened a factory in Chennai, India, to do mold conversion and mold and hotrunner refurbishment for local preform makers.

MacDonald said Husky typically has expanded globally to supply major beverage bottlers.

In other news, MacDonald said Husky is coming out with its HyPEt HPP, after launching the HyPET AE at the 2010 K show in Germany. Husky has sold about 30 HyPET AE machines, he said.

He dubbed the news model the HyPET 4.0 – using Silicon Valley terminology, since Husky wants to introduce presses with major advancements about every two years. It will enable Husky to reduce PET preforms even more, by using a better mold and hot runner system and improving machinery performance.


Comments

Husky's goal: thinner parts, faster machines

By Bill Bregar
Senior Staff Reporter

Published: April 2, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Indian auto parts maker set to buy assets in Germany, Mexico

December 18, 2014 10:35 am ET

Indian auto parts maker Samvardhana Motherson Gropup is buying the assets of insolvent German plastics car parts producer Scherer & Trier (S&T).    More

Image

Quick-Start manifolds designed to complement Rheo-Pro hot runners.

December 17, 2014 6:00 am ET

MHS Mold Hotrunner Solutions of Georgetown, Ontario, has introduced the pre-engineered Quick-Start line of hot runner manifolds, designed to...    More

Mold maker I. Thibault plans to invest more capital in Mexico

December 16, 2014 1:03 pm ET

Canadian mold maker I. Thibault Inc. plans to invest more capital in its wholly owned Mexican subsidiary, which it started operating in the summer.    More

Image

Milacron opening Mexico technical center, considers another in Brazil

December 16, 2014 12:58 pm ET

Milacron LLC plans to officially open a new technical center in Querétaro, 140 miles northwest of Mexico City, early in 2015, and the company is...    More

Image

Indian mold maker Vasantha sees 'great potential' in Mexico

December 16, 2014 12:52 pm ET

Indian mold maker Vasantha Tool Crafts Pvt. Ltd. has appointed its first sales representative in Mexico, 15-year plastics industry professional Eric B...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events