More machines at NPE means more recycling - a lot more

Mike Verespej

Published: April 3, 2012 6:00 am ET

Related to this story

Topics Sustainability, Recycling, Machinery, NPE 2012

ORLANDO, FLA. (April 3, 8:45 p.m. ET) — Maine Plastics Inc. projects that it will recycle in excess of 350,000 pounds of plastics at NPE2012 in Orlando — or almost three times as much as the 125,000 pounds it recycled at NPE2009 in Chicago.

“We have 55 exhibitors running materials through their machines,” said Robert Render, CEO of Maine’s environmental and consulting business, A Greener Solution LCC, and vice president and past president of Zion, Ill.-based Maine Plastics.

The company has been the official recycler for five consecutive NPE shows.

The volume of plastic scrap being recycled is even more impressive, he said, when you take into account that three years ago NPE was a five-day show and 75 exhibitors were running material and participating in the program.

“The number of participating exhibitors in the program is lower, but they are running more machines and creating more scrap,” said Render, who believes that the exhibitors are “running full blast” with their machines because NPE is a four-day show instead of five.

The majority of the recycling activity, he said, is in the West Hall where Maine has its recycling operations set up in the docking area outside. At NPE2009, Maine recycled 95 percent of the potential recoverable materials. This year the target is to equal or surpass that same percentage.

Maine supplies exhibitors with two different size bags, two different containers or gaylords to use to collect the scrap or products they make at the show.

Render said most exhibitors use either the 75 two-wheeled 96-gallon blue bins supplied by Orlando, Fla.-based Rehrig Pacific Co., or the 20 MACX48 bins supplied by Decade Products, part of Grand Rapids, Mich.-based Cascade Engineering Inc.

Some companies supply their own bins, Render said. And unlike other years when gaylords were popular, he said only three gaylords are in use at NPE 2012 for recycling.

Moving the bins back-and-forth from the show floor to the loading docks is smoother at NPE2012 since exhibitors have “more flexibility” in how to move them from their booth to the dock than they did at previous NPEs, he said.

The majority of the plastics recycled are “the commodity resins—polypropylene, polyethylene, polystyrene and PET,” Render said.

To facilitate sorting at the dock, Maine, as it did at previous NPEs, created a sample part board of all the parts run by the participating exhibitors. It uses a coding system so that each truckload that leaves the dock is a singular resin.

Maine is using a local trucker, who further consolidates the material into trailer loads of single resins that are shipped to the Maine recycling plant in Apex, N.C.

“There is a lot of stuff going on, and this is a new venue,” Render said. “But all of us [Maine, the Orange County Convention Center and the Society of the Plastics Industry Inc., which puts on the triennial show] have been thoroughly prepared. We did extensive preparation ahead of time.”

In addition, to make sure the recycling works smoothly during the show, Render said the three groups meet every day to discuss “the issues that come up.”

The staff of the OCCC—which is hosting its first NPE—has been “very cooperative,” added Render. One example, they provided separate compactors in the dock area for cardboard and for plastics. At McCormick Place in Chicago, there was a single compactor.

“The culture of the venue has helped with the recycled process,” said Render. “We are recycling more stuff.”

OCCC is responsible for recycling other plastics materials such as the film from carpets that are laid down for the show, and beverage and water bottles and other plastics tossed into waste and recycling bins at the show. The material is taken to a materials recovery facility where it is sorted into separate streams for recycling.

 In 2011, the OCCC recycled 71 percent of the dry waste generated at all the shows at the convention center. “When we initially met with them to discuss our recycling at the show, they had data on every individual show,” Render said.

“The recycling at the show is going well and it will meet the objectives” of SPI, said Render.

“Bill Carteaux [the president and CEO of SPI] recognizes that there is a lot of potential criticism of plastics from litter and wanted to put an emphasis on recycling,” said Render. 

He speculates that the recycling ethic at the OCCC—along with lower projected costs for exhibitors and attendees— may have been one of the catalysts for the move of the show to Orlando.


Comments

More machines at NPE means more recycling - a lot more

Mike Verespej

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

EU moving closer to rules that will reduce plastic bag use by 80 percent

April 17, 2014 10:54 am ET

European Union countries could have to reduce the use of plastic shopping bags by at least 80 percent by 2019 under draft rules backed by the...    More

Negri Bossi's new owners may 'bring significant manufacturing' to US

April 16, 2014 1:09 pm ET

Italian plastics equipment major Negri Bossi may “bring significant manufacturing of injection molding machines back to the United...    More

Image

Polyair rebuilds from Sandy with help from Process Control

April 16, 2014 4:11 pm ET

Hurricane Sandy gutted Polyair Inter Pack Inc.'s Carlstadt, N.J., plant more than a year ago, and Brian Clawson won't soon forget the devastation.    More

With European Parliament vote looming, official urges bag restriction

April 16, 2014 9:56 am ET

Janez Potocnik, Europe's commissioner for the environment, told the European Parliament April 15 that plastic shopping bags are a “highly visibl...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events