HPM is back at NPE - but now it's made in China

By Nina Ying Sun
Assistant Managing Editor

Published: April 3, 2012 6:00 am ET

Related to this story

Topics Injection Molding, Machinery, NPE 2012

ORLANDO, FLA. (April 3, 8:35 p.m. ET) — The HPM brand of American injection molding machines is back at NPE — but now it’s made in China.

A 220-metric-ton servo-hydraulic machine is churning out clear plastic boxes at HPM North America Corp.’s NPE booth (26058).

This is the first HPM injection molding machine that has been assembled in the Chinese parent company’s factory in Foshan, Guangdong province. It is manufactured based on American standards including the dimensions and safety standards, said Richard Yan, CEO of Guangdong Yizumi Precision Machinery Co. Ltd.

About 15 percent of the components on the machine were sourced in the United States, mostly electric control parts, he added.

The NPE2012 exhibition is the first step of what Yan called “active sales” of HPM injection presses, which will be in the range of 80 to 1,100 metric tons and target such end applications as electrical appliances, packaging and consumer products.

“It’s perfect timing,” Yan said, alluring to the healthy growth of the U.S. market indicated by latest economic data. As the ancient Chinese saying goes, success is the right people at the right time in the right location. “From what we’ve seen at the show, there is a clear uptick in the market.”

The new HPM machine will offer strong price advantages. Yan said the prices will be “no higher than used machinery, which has seen a price hike due to short supply in this country.”

After acquiring HPM’s intellectual property, brand and customer lists through an auction in March 2011, Yizumi established HPM North America Corp. in September 2011, and then acquired 100 percent of Bivouac Engineering and Service Co. in January. Bivouac owner and former HPM president William Flickinger was appointed the president of HPM North America.

“He is now fully dedicated to bringing the HPM machines back,” Yan said.

The first and foremost task is to build a team, Yan noted. HPM NA now has eight technical staff in Marion, Ohio, all of whom hired locally. Yan expects to expand the headcount to 12-15 by the end of the year, and the new additions will be local American employees as well.

“Our plan is to spend two years [since September 2011] to fully digest HPM technology and experience, and start making the full range of HPM machines in China.” That will include about 8 models of die casting machines and up to 12 models of injection molding machines.

But the company also doesn’t rule out the possibility of start assembling the machines here in the U.S., perhaps within 3-4 years, Yan said.

The localization effort will start in the third quarters, when the company will start modifying and customizing standard small presses (under 500 metric tons) at the Marion site. The standard machines will be assembled and shipped from China.

With “urgent orders,” Yan said the company will ship “half-finished” machines from China and finish them in Marion. “We are already doing that with die casting machines.” That will speed up the delivery time.

Many American customers have deep feelings for the HPM brand, said Yan. One company that stopped by the booth to ask for parts and service said it is running a 1968 HPM press. “Some customers tell me that this is a brand they saw when they were still kids.”

Yizumi is determined to replicate the HPM model in other strategic markets. “HPM’s demise to a large extent was due to its lack of global expansion. We are definitely embarking on a global strategy.”

The company plans to launch a technical center in India, where Chinese injection presses are still subject to lofty anti-dumping tariffs.

Other target markets include Brazil and Turkey.

The aggressive global expansion is backed by Yizumi’s progress in China. The company has already submitted its IPO application to the Shenzhen Stock Exchange and started the review process. “We are hopeful that we’ll be able to launch the IPO this year, which will bring in capital that we’ll use to expand.”

In the meantime, Yizumi is constructing two new factories, one in Foshan and another in Suzhou, Jiangsu province. The new Foshan facility is scheduled to start production in first quarter 2013 and the Suzhou one by mid year.

Yizumi is also aiming to launch prototypes of all-electric and two-platen presses in China this year. But Yan commented that servo-hydraulic machines combine the advantages of energy saving, high precision and cost-effectiveness.

HPM NA will have two to three American agents join the sales effort after NPE.

“The market is happy to know HPM is back,” said Flickinger, “and customers are interested to see the new machine.” He is the machine on display will go to Marion and stay there for a month, when the company will prepare service manuals. He said HPM is well prepared for the full roll-out, including trained service staff and available parts.

Traditionally, HPM customers were located in the Midwest, South and Southwest. But with the new opportunity, the brand will reach farther in the U.S. and beyond.


Comments

HPM is back at NPE - but now it's made in China

By Nina Ying Sun
Assistant Managing Editor

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

German electronics firm expanding in Hungary

April 22, 2014 9:46 am ET

German electronics manufacturer Provertha GmbH has announced plans to set up a new plastic galvanizing plant at the Kapuvár Industrial Park, in...    More

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to...    More

MGS buying N.Y. medical molding plant from Hospira

April 17, 2014 10:19 pm ET

MGS Manufacturing Group is purchasing the Buffalo, N.Y., injection molding facility and related product line of Hospira Inc., effective July 1. Terms ...    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 – The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events