Plastic bans, EPR laws not going away

Mike Verespej

Published: April 3, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability, Public Policy, Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 3, 8:30 p.m. ET) — Bans on plastic bags and take-out polystyrene containers aren’t going to easily go away and are only part of a larger effort to get rid of products seen as litter or marine debris, says Laurie Hansen, executive director of the Western Plastics Association.

And next on the horizon, she says, are extended producer responsibility laws.

“They are all happening because litter is happening and marine debris is happening,” said Hansen during a presentation at the Business of Plastics conference at NPE2012. “Litter and marine debris is the hot button issue on the West Coast. Paper and aluminum sink, but that’s not what’s targeted. It’s what floats and that’s plastic.”

“Environmentalists are running with that to enact bans,” said Hansen, who, along with the WPA, is based in Sacramento, Calif. “And local communities want manufacturers to pay for diversion and recycling. And, if that doesn’t happen, they want to get rid of the product. They are many people who want disposables gone.”

“The bans on plastic bags, polystyrene, BPA, chemicals and other resins are going to continue,” she said. “It’s not going to stop despite industry efforts.

“But as an industry, we need to be working together, pulling together,” said Hansen who has dealt with plastics industry issues in California as a lobbyist for more than 20 years. “We need to talk as an industry about the issues and what’s going on because there is a place for every type of plastic. We have to explain that to people. We all need to be active, not reactive.”

As an example of being pro-active, she pointed out how Dart Container Corp. is doing “a great job” of recycling polystyrene foodservice packaging, particularly in California, and how the Plastics Foodservice Packaging Group of the American Chemistry Council is paying for equipment to condense polystyrene into bales to make it easier to recycle and transport that material for recycling.

Related to that, Hansen said industry could help its own cause through greater use of recycled content in its products. “The industry could make a lot of friends if they do that.”

And while the people in the industry need to talk to either one, they can’t just talk to their fellow counterparts in industry, she said.

We also need to be talking to our detractors because they are the ones that have the public ear,” said Hansen. “We need to know what they’re doing and they need to know what we’re doing” to develop solutions that work for all parties.

One blossoming item on legislative agendas is extended producer responsibility, where the manufacturer is responsible for the cost of recovering that product at the end of its life.

In most EPR programs, governments set parameters for waste diversion, recycling, or both. Specifics of how to achieve those objectives are determined by the companies that are part of the supply chain for the product, or packaging that needs to be recovered at the end of its life.

Today more than 30 European countries have some type of EPR packaging law, and the concept has been gaining momentum in Canada the past six years.

In the United States, EPR has been mostly focused on electronic goods—25 states now have some type of e-waste take-back program.

“EPR has taken root,” said Hansen. “We can’t bury our heads in the sand as an industry. We have to find a way to work with governments and non-government organizations” to address that issue.

There are other issues, emerging in California and spreading along the West Coast, that the industry needs to keep its attention on. “In the year coming up, we will have issues very important to the plastics industry,” she said.

For example, the city of Los Angeles is considering whether to ban both plastic and paper bags, or to ban plastic bags and place a fee on paper bags.

The California State Water Quality Board is looking at restrictions on trash going into waterways and considering giving cities credits if they ban plastics bags and PS containers. “That is a very serious endeavor right now,” she said.

The California Green Chemistry Initiative is looking at what Hansen called “broad, sweeping regulations” that would require companies to reduce CO2 emissions back to the levels of 1990.

There are also several proposals to ban any packaging that is not recyclable or compostable. “That goes way beyond bags and polystyrene to things like potato chip pouches. This has the potential to go much wider in scope,” said Hansen.

And SB568—to ban all PS packaging statewide—remains on the assembly floor and could be voted on anytime before the California legislative sessions ends in September.

“If we don’t get together and work together, we will have major problems,” she said. “I truly believe our plastic products have helped the world, but there are folks out there that don’t. I want to change their mind.”


Comments

Plastic bans, EPR laws not going away

Mike Verespej

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

PSB Industries acquires plastic closures specialist

July 31, 2014 3:47 pm ET

French packaging manufacturer PSB Industries has signed an agreement to acquire C+N Packaging Inc., which specializes in plastic closures for...    More

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gray signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co., th...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events