3M using glass bubbles to save part weight

By Frank Antosiewicz
Correspondent

Published: April 3, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Product News, NPE 2012

ORLANDO, FLA. (April 3, 8:15 p.m. ET) — With the growing focus on the light-weighting of parts, 3M Co.’s Energy and Advanced Materials Division (Booth 35000) is finding increased interest for its glass bubble product line, and was at NPE2012 — along with some of its customers — showing what it can do.

It also brought along its newest glass bubble version, the iM16k for injection molding.

The use of the glass bubble line has provided five advantages for processors, noted Louis Lundberg, global business manager for specialty additives for the 3M Energy and Advanced Materials. He pointed to light-weighting of products, improved resin throughput, improved stability in fiber fill, more design flexibility and as a carbon neutral additive, it contributes to environmental sustainability.

He said that the 3M glass bubbles have been used for wide range of thermoplastics, composites and elastomers. Now the next generation is able to survive use in injection molding and compounding processes. Yet it has a specific density of only 0.46 grams per cubic centimeter and provides significant weight reductions when used.

“Together with 3M, we’ve developed a hand rail for use on AirBus. It’s underneath the luggage rack and the weight savings was 12.6 percent and leads to significant fuel savings over the lifetime of the plane,” said Bernd Kupferer, business unit manager for industrial solutions at Rehau Industries LLC in Leesburg, Va.

He said that it was designed with the plane with 3M’s first generation glass bubbles and now is planning to use the newer version once it runs through the various approval procedures.

Another customer with the display in the booth was Hyundai Engineering Plastics, of South Korea, which created a center console for the Kia Optima. Kim Beom-Ho, senior manager of the PP research team, noted that the glass bubbles had reduced the console’s weight from 3.44 pounds to 2.94, about a 10 percent savings.

A reformatting of the Honda Ridgeline spare tire tray resulted in a density reduction from 1.9 to 1.3 grams per cubic centimeter, according to Lou Dodyk, of Magna Exteriors and Doors of Troy, Mich., and shaved over 10 pounds from the truck’s weight.

“We’ve actually been using 3M glass bubbles since 1980,” said Dodyk, who admitted that they plan to use the new version as well.

With all the testimonials, the new product has firm group of users and “people are motivated to do new more stuff even though the economy is not perfect,” said Doug Rowen, business director for specialty additives at 3M Energy and Advanced Materials.

Lundberg noted that 3M first started using glass bubbles for injection molding and extrusion of such products such as fuel system roll-over valves, exterior vehicle cladding and home appliances. Now it is finding that the properties of its glass bubbles such as IM16K  can help customers improve fuel economy and reduce co2 emissions.

Lundberg also said that injection molders with glass-fiber filled systems can reduce warpage for improved fit and finish, and can also reduce cooling times of finished parts from 5 to 10 percent.

He said that the glass bubbles are used in everything from finished talc filled polypropylene and glass fiber filled nylon plastic parts in automotive to PVC foam based fishing boots for thermal benefits and floatation.

They even had a display of a pair of boots that the use of the glass bubbles had created a better product. Keiji Nakayama, senior marketing manager for the 3M Japan Group displayed a regular PVC boot that sank in a fish tank. A glass bubble version had a 15 percent weight reduction and floated. Thereby, a new boot product is being readied for sale by the end of the year.

The 3M division has expanded its capacity in the U.S. but declined to disclose details. However, it did say that it expanded capacity in all of its plants, most recently in Brazil and also in South Korea and France.

The newest iM16K production quantities will be available from the Korean plant in the fourth quarter of 2012, followed by the other plants around the world in 2013.


Comments

3M using glass bubbles to save part weight

By Frank Antosiewicz
Correspondent

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Formosa to be compensated for Vietnam riot

July 28, 2014 1:44 pm ET

Taiwan's Formosa Plastics Group will receive $2.39 million from the Vietnamese government and insurance companies for damages suffered during the...    More

Image

Ukraine's Group DF may be forced to sell Crimea-based additives plant

July 28, 2014 10:12 am ET

Group DF, the industrial business of Ukrainian tycoon Dmitry Firtash, may be forced to sell off Eastern Europe's biggest producer of titanium oxide,...    More

Image

DuPont resins help take Nike golf balls 'Fore!'ward

July 25, 2014 1:07 pm ET

It may be difficult to imagine just how much science, not to mention rubber and plastic components, go into a golf ball. But global giant DuPont Co....    More

Image

Bioplastics maker wins government funding

July 25, 2014 12:13 pm ET

Canadian bioplastics maker Solegear Bioplastics Inc. has won $1.6 million in funding from the government-sponsored Western Innovation Initiative...    More

Image

Report: biodegradeable plastics use in Europe to grow 12 percent

July 25, 2014 10:25 am ET

The biodegradable plastics market in Europe is forecast to witness 12 percent compound growth during 2014-19, according to TechSci Research's “E...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events