NyproMold using medical technology to make precision parts

By Rhoda Miel
News Editor

Published: April 3, 2012 6:00 am ET

Related to this story

Topics Molds/Tooling, Product News, NPE 2012

ORLANDO, FLA. (April 3, 9:35 a.m. ET) — The same technology used in medical diagnostics is now being used to help track mold manufacturing, and diagnose potential problems long before they may infect production.

NyproMold (Booth 4263), the mold making business unit of Nypro Inc., has launched the use of CT scanning for precision parts, making it possible to analyze parts quickly and accurately and qualify molds faster than before.

“Imagine the ability to see 1,200 images within the mold, within two hours,” said NyproMold President Bill Muldoon.

Like a doctor’s use of a CT scan – which takes images inside a patient’s body to spot problems without invasive surgery – NyproMold’s CT can study every angle of a part as it comes off the mold, making certain that it meets all production requirements from the very beginning.

The system also produces a color-coded report which quickly points to any potential issues, so they can be fixed quickly, he said.

Unlike computerized measuring systems, the CT scan’s X-rays can measure every angle, and even take a look inside a closed part. If there a component inside a closure that does not quite match, NyproMold can spot it quickly.

“Now we’re seeing everything that’s critical to the customer and can adjust the steel overnight,” Muldoon said. “That same issue might be in a CMM report, but it’s on page 37 of a document that you may not see and [problems] won’t show up until three weeks later.”

The scan is only part of the process, he said. The company uses the same up-front three-dimensional rendering and design as other mold makers, but the CT scan can provide another level of security and trouble checking. That information is especially vital for high precision, critical parts for the medical industry and other key businesses.

NyproMold believes it is the only mold maker in North America using CT scanning. During initial mold trials, the CT unit is part of a computer aided design model comparison service called FASTscan.

Tom Casali, manager of NyproMold’s technology center, says that FASTscan provides the most accurate dimensional results compared to traditional metrology techniques.

“It gives us added confidence going forward with a full first-article inspection,” Casali said.

A CT scan can also be used to compare replacement molds to the original parts, or even confirm that a different resin produces the same quality parts as another material, Muldoon said.


Comments

NyproMold using medical technology to make precision parts

By Rhoda Miel
News Editor

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Materials companies introduce a range of new products at Fakuma

October 22, 2014 11:29 am ET

DuPont Co. led a parade of materials firms with new products at Fakuma 2014.    More

Negri Bossi shows energy saving systems

October 22, 2014 11:21 am ET

Negri Bossi SpA showed two 210T injection molding machines at Fakuma in Friedrichshafen, Germany, with the SmartEnergy device for energy saving. Both ...    More

Priamus promises extended life for in-mold sensor

October 22, 2014 11:11 am ET

Priamus System Technologies AG has developed an in-mold sensor made of an extremely hard and chemically resistant material, extending the life of the ...    More

Erema in-house recycling event Oct. 29 in Austria

October 22, 2014 11:08 am ET

Erema Engineering Recycling Maschinen und Anlagen GmbH will hold an in-house recycling event, Discovery Day 2014, at its headquarters in Ansfelden,...    More

NGR system designed to recycle bulky or thick-walled plastic parts

October 22, 2014 11:04 am ET

NGR Next Generation Recyclingmaschinen GmbH demonstrated its A:GRAN-series systems to recycle bulky or thick-walled plastic parts at Fakuma in Friedr...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events