Phthalate-free, bio-based PVC products hitting store shelves

Mike Verespej

Published: April 3, 2012 6:00 am ET

Lou Cappucci

Related to this story

Topics Materials, Suppliers, Sustainability, Packaging, Film & Sheet, NPE 2012

ORLANDO, FLA. (April 3, 7:45 a.m. ET) — Phthalate-free flexible vinyl compounds that have bio-based plasticizers and reduce CO2 emissions by 41 percent have been developed by Teknor Apex Co. and are being incorporated into several commercial applications just now appearing on retail shelves.

The new BioVinyl compounds contain phthalate-free Dow Ecolibrium bio-based plasticizers made from non-food plant byproducts by the Dow Electrical and Communications unit of Dow Chemical Co. Teknor Apex has the exclusive North American rights for certain applications to market the vinyl compounds containing Dow Ecolibrium. 

Capucci expects that the initial markets for BioVinyl will be where companies are looking for a vinyl without phthalates.

“A lot of our customers are looking to get away from a difficult issue and turn that into positive press,” said Capucci. “This is a good compound for anyone with a vinyl product that is close to the consumer. Those are the first people where we will see the demand come from.”

He pointed to one company that discontinued a good-selling line of vinyl apparel because of concerns about phthalates. “We are in discussions with then,” said Capucci. “They said they would introduce it back into the market if we can develop a bio-based phthalate-free plasticizer for them.”

“The second group of companies that will be interested are those that have sustainability goals because they see this as a benefit around carbon footprint,” said Capucci.

A life-cycle analysis conducted by Dow and reviewed by a third-party indicates that every ton of vinyl compound made flexible with Dow Ecolibrium reduces CO2 equivalent emissions by 41 percent compared to phthalate-containing vinyl compounds.

“BioVinyl compounds possess a lower global-warming potential than conventional flexible vinyl, and their carbon footprint reduction is even greater in comparison with non-vinyl plastics,” said Capucci. “Many people want a better carbon footprint without a reduction in performance.”

Teknor Apex said that it can supply commercial quantities of BioVinyl for a number of applications including medical tubing, masks and collection bags; automotive window seals, interior and exterior trim and instrument panel skins, and consumer products such as footwear and toys.

In addition, it said development work continues on applications such as blood bags and wire and cable jacketing.

“People want bio-based products, but don’t want to pay extra for it,” said Zinkweg. “We hope that with this BioVinyl compound we have discovered the right balance in that equation. As a company, bio-based is something that we want to put a lot of effort into. There is a drive in the marketplace toward going toward these types of chemistries.

“BioVinyl is a co-branded product and it is an example of how close we and Teknor Apex worked together and collaborated to made the product better,” said Zinkweg. “This is how we want to bring products to the market. We want to work in partnership with companies who have customers who want products like this.”

“If you replace all the phthalates in products worldwide, you could have a huge effect globally on carbon footprint,” he said.


Comments

Phthalate-free, bio-based PVC products hitting store shelves

Mike Verespej

Published: April 3, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Canadian mold maker Thibault adding to new operation in Mexico

August 27, 2014 3:19 pm ET

Canadian mold maker I Thibault Inc has purchased an established Mexican company, Tecnimoldes SA de CV, for a seven-figure-dollar-sum and renamed it...    More

Image

Design, materials, engineering finding a faster way forward

August 27, 2014 1:50 pm ET

Engineering and design specialists at Altair Thinklabs and Eastman Chemical Co. have developed prototypes that would not just help Paralympics...    More

Image

Design Stories: Young designers showing the way in adaptive design

August 27, 2014 12:12 pm ET

Amanda Bolton, then 19, decided to change her major at the University of Cincinnati from fine arts to industrial design, creating products for people ...    More

Image

Sony entering recycled PC market

August 27, 2014 11:08 am ET

Consumer electronics giant Sony Corp. is getting into a sideline of selling recycled resins.    More

Image

PolyOne expands special effects offerings for PET

August 27, 2014 11:03 am ET

PolyOne Corp. has added a new line of shimmer and frost-effect colorants to its InVisio line of color services and solutions.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events