Virginia company uses poultry feathers in plastic

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 4, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 4, 8 p.m. ET) — Virginia compounder Eastern Bioplastics LLC has found a new, untapped raw material source — poultry feathers.

The Harrisonburg, Va., start-up is about to commercialize technology to mix plastics with some of the three billion pounds of leftover chicken and other poultry feathers in the United States to make what it says will be a cheaper, lower carbon footprint material for a range of applications.

“It’s a byproduct, and unlike some other bio-resins that are out there on the market, ours is the only one that doesn’t belong in the food chain,” said President and majority shareholder Sonny Meyerhoeffer. “Nowhere in the food chain is it used other than for animal feed or pet food, and it’s currently being pulled back from in the pet food industry.”

Eastern recently took delivery on its first commercial scale extrusion line, an Omega 95 twin-screw extruder from Bangalore, India-based Steer Engineering Pvt. Ltd. (Booth 5762), which helped it develop the process. It currently has a lab scale machine.

The new material will mix polypropylene or polyethylene with poultry feathers, with up to 50 percent feathers by weight, he said in an interview at Steer’s booth at the NPE show.

Unlike some wood fibers, the feathers bind well to plastic because they are a keratin protein, similar to hair or nails, and can potentially produce a stronger and lighter material, the company said.

Meyerhoeffer said the material can be used in automotive parts, office furniture and simpler products like plastic buckets. It’s also seeking approval from the Food and Drug Administration to use its compounds, which would significantly broaden its potential markets, he said.

“It’s a wide range of things it will be used for, anything that is hard and durable that is injection molded,” he said.

Eastern has some injection molding machines in-house, but plans to manufacture the material and sell it to injection molding companies. The company is also interested in licensing the technology, and is looking globally, Meyerhoeffer said.

“We’ve had interest from all over the world, not only the resin side but in the licensing technology side as well,” he said. “Our business model is you won’t have one big resin factory but you’ll have little factories following the poultry business.”

Meyerhoeffer said he started Eastern after being approached by Justin Barone, who at the time was a researcher at the United States Department of Agriculture and is now a minority shareholder in the company.

Barone was on a USDA team that had done the initial research idea, but he had been unsuccessful in three tries working with other companies to commercialize it before an acquaintance connected the two men in 2007.

Meyerhoeffer said he was intrigued by the research. He had a background in the poultry industry, starting a company, the Virginia Poultry Growers Association, in Hinton, Va., as a venture to save 130 turkey growers and a processing plant with 500 jobs, and served as president of that group for three years.

In 2008, he put together a business plan and formed Eastern Bioplastics. Today the company has 10 employees.

One of the challenges was creating a process that both cleans the feathers, which are obtained from poultry processing plants, and that can operate in a continuous, as opposed to batch, manufacturing process that is compatible with extrusion.

Another challenge was to make it economical and energy efficient, “going at it in an economically viable sense so you weren’t putting more energy in that what you’re getting out,” he said.

“You have to end up at an energy-plus situation or you haven’t accomplished anything,” Meyerhoeffer said.

The company has done some in-house life cycle analysis and is now commissioning independent LCA studies, but it believes the material can have a carbon footprint up to 30 percent less than traditional petrochemical-based plastics.

“That is huge for somebody looking at a building material and picking up LEED credits [for energy efficient buildings,” he said.


Comments

Virginia company uses poultry feathers in plastic

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Proposed Shell project draws more than 1,000 to informational meetings

April 17, 2014 2:03 pm ET

More than 1,000 people attended a pair of public meetings hosted by Shell Chemical LP on April 16 to discuss the possibility of building a major...    More

Image

Hedging can slow the resin rollercoaster

April 17, 2014 3:00 pm ET

The good old days — if they even ever existed — are gone, and.Andy VanPutte thinks volatility in the resin market is here to stay and...    More

Spain's Cristian Lay Group buys two materials units of bankrupt LSB

April 17, 2014 11:11 am ET

Spanish industrial conglomerate Cristian Lay Group has purchased two of the bankrupt Spanish PET packaging group La Seda de Barcelona.    More

EU moving closer to rules that will reduce plastic bag use by 80 percent

April 17, 2014 10:54 am ET

European Union countries could have to reduce the use of plastic shopping bags by at least 80 percent by 2019 under draft rules backed by the...    More

Negri Bossi's new owners may 'bring significant manufacturing' to US

April 16, 2014 1:09 pm ET

Italian plastics equipment major Negri Bossi may “bring significant manufacturing of injection molding machines back to the United States”...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events