Mobilegs garners top design

By Rhoda Miel
News Editor

Published: April 4, 2012 6:00 am ET

Designers Augusto Picozza, left, and Michael Paloian judge the IDSA/Plastics News Design Award at NPE2012. Jeff Weber's Mobilegs plastic and aluminum crutch took top prize and also won an SPI design award. (Plastics News photo by Michael Marcotte)

Related to this story

Topics Design

ORLANDO, FLA. (April 4, 7:45 p.m. ET)  — A few years ago, Jeff Weber found himself in a hospital emergency room with a broken heel. Like millions of people before him, he was handed a pair of basic crutches.

“Within a matter of a few hours, I realized how ill designed they were and how painful they were to use,” he said. “Instead of wood, crutches are now aluminum and foam, but beyond that, nothing has evolved.”

So Weber, a Minneapolis-based designer and founder of Studio Weber + Associates, set about making something better. “I had nothing to do but sit on my butt,” he said.

The final product he developed, Mobilegs, is a plastic and aluminum crutch that replaces a typical padded foam shoulder cradle with a plastic web, similar to the design of an executive office chair. The Mobilegs crutch, brought to market by Mobi LLC of Minneapolis, won the medical and scientific category award from the Society of the Plastics Industry Inc.’s design competition awards, selected Tuesday at NPE2012 in Orlando.

Weber, who discussed its development in a March 28 news release, also won the IDSA/Plastics News Design Award, selected by members of the Industrial Designers Society of America and given to product designers.

Judges praised the design for taking a product that most people ignored and updating it in practical and aesthetic ways.

“You almost can’t wait to hurt your ankle just so you can use it,” joked Augusto Picozza, director of industrial design for Jarden Consumer Solutions and one of the IDSA judges for the competition. “It showed the greatest transformation from what was [in the market] and what can be.”

Illinois Tool Works Inc. is the mold maker and molder for the Mobilegs. BASF AG is the material supplier.

Since coming on the market, the Mobilegs has won approval from medical professionals and users. Ricky Rubio, a player for the National Basketball Association’s Minnesota Timberwolves, has used the Mobilegs since suffering a knee injury.

Michael Paloian, a design judge and a designer for Integrated Design Systems Inc. of Great Neck, N.Y., said it makes sense that users would appreciate the crutch. “[The design] actually makes the product look more like a sports product than a handicap product,” he said.

Other parts noted for their design by IDSA members Paloian, Picozza and Sean Hagen of BlackHägen Design, were the CaliBowl by Simple Wave LLC of Hayward, Calif., and the Regeneration chair by Knoll Inc. of Holland, Mich.

The chair, molded by Bemis Manufacturing Co. using materials supplied by DuPont and Laverne, uses a woven pattern to give a beautiful look to an office chair, but presents that chair at a competitive cost for non-executive-level employees.

The CaliBowl, molded by Jatco Inc., takes an aesthetic twist on the typical plastic housewares bowl, Paloian said. Unlike the thin plastic bowls seen on most store shelves, the bowl is very sculpted with thin walls and an undercut that helps to keep items from spilling out, which adds functionality.

“I spent 14 years at Tupperware,” Picozza said, “and I can’t figure out how they molded it.

Jatco also was mold maker for the CaliBowl, which also tied for the SPI Judge’s Award in the design competition.

Simple Wave shares the award with the IML Syringe Barrel, a pre-fillable syringe using in-mold labeling.

Tech Mold Inc. of Tempe. Ariz., CBW Automation (Booth 3169) and Mold-Masters Ltd. (Booth 4463) jointly developed the IML Syringe Barrel. Tech Mold built the mold. PolyOne (Booth 15030) and Inland Label provided the material.

The Best In Show award went to the 111 Navy Chair by Emeco of Hanover, Pa., using recycled PET supplied by BASF (Booth 24000). The chair aims to provide higher value to recycled resin, with the name taken from the 111 PET bottles that are recycled into each chair, which is a replica of the 1940s all-aluminum Navy chair.

The 111 Navy Chair also took the top award for Buildings and Furnishings and the Sustainable Consumer Product award.

Other awards went to:

• Trexel Inc. won the Emerging Technology Award for a margarine tub with an in-mold label for PACCOR Packaging Deutschland GmbH. Using the MuCell process provide a 3-dimensional, soft touch effect, and also adds insulating properties to the injection molded polypropylene tub. 

• A water outlet for Nissan Motor Co., won the Single Part Award. Miniature Precision Components Inc. of Walworth, Wis., is the molder of the part which is a metal to plastic conversion and combines what had been two separate parts in one component. Solvay Specialty Polymers supplied the resin and Industrial Molds Group was the mold maker.

• Tigris, an all-plastic airline trolley molded by Bemis Manufacturing using material from Solvay Advanced Materials, won the Automotive and Transportation category. VinylTech International Inc. of North Jackson, Ohio, was the mold maker. The Tigris also won the Innovations in Plastics award and the Project Award. Tigris brand owner AeroCat BV of Tilburg, the Netherlands, intended the trolley to be a lighter and fully recyclable “cradle-to-cradle” replacement for metal airline trolleys.

• The Consumer Products Award went to the Purist Hydroflo water bottle for specialized bicycle components. Harbor Fluid Products is the designer, molder and mold maker.

• The 1-Seal container lid for the Better Bean Co. of Eugene, Ore., won the Packaging Award. The lid uses a proprietary technology using an in-mold label to create a cap and seal in one step, which eliminates the need for foil or a film seal. Arta Plast AB of Tyreso, Sweden, is the molder and mold maker, using manufacturing equipment from Packline West Inc. of La Verne, Calif.

• The Genesys fluid pump by Multi-Duti Manufacturing Inc. won the Sustainable Part/Component Award. The pump is the first known end-suction centrifugal pump using Bulk Molding Compounds Inc.’s BMCI-840 material while still meeting strict functional requirements. Ci-Dell Plastics of Mequon, Wis., is the molder and Mold Craft Inc. of Willernie, Minn., is the mold maker.

• The Sustainable Process Award went to the polylactic acid foam articles produced by Sekisui Plastics (Booth 32109). Sekisui is also the designer, molder and mold maker.

The project used Sekisui’s expanded PLA foam beads to produce a variety of shapes, including helmet inserts.


Comments

Mobilegs garners top design

By Rhoda Miel
News Editor

Published: April 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Plastics barely mentioned in iPhone 6 introduction

September 9, 2014 4:26 pm ET

Bigger than its predecessors, the 4.7-inch iPhone 6 and the 5.5-inch iPhone 6 Plus will pack more pixels and power into a thinner design that has a...    More

Image

3-D printed instruments hit the right note

September 9, 2014 2:00 pm ET

AUSTIN, TEXAS — At lunch during Industrial Designers Society of America's annual conference this year, members got a taste of some inventive...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events