Arburg positions Edrive as hydraulic alternative

By Bill Bregar
Senior Staff Reporter

Published: April 4, 2012 6:00 am ET

Related to this story

Topics Machinery, Product News, NPE 2012

ORLANDO, FLA. (April 4, 7:30 p.m. ET) — NPE2012 marks the U.S. premier of Arburg Inc.’s Edrive all-electric injection molding machine — one of six presses at Arburg’s NPE exhibit (Booth 3729).

Arburg has positioned the Edrive as an entry-level all-electric, at the same price as a hydraulic machine.

“The NPE is an ideal time to present the new fully electric Edrive machine range because the North American market now has more extensive experience with the use of electric machines for producing technical components,” said Friedrich Kanz, president of Arburg Inc.

Arburg offers Edrive presses in clamping forces of 66 tons and a 3.7 ounce injection unit to a 220 press and a 15.3 ounce injection unit.

In Orlando, a 66-ton Edrive is molding ABS trays in a 12-second cycle.

Arburg’s theme is production efficiency, a natural angle after focus on energy efficiency. Officials said the entire value chain should be analyzed, covering all variables. That includes product design, even down to the material chosen, since energy requirements for melting different types of plastics can vary widely.

Another featured press at Arburg’s NPE2012 display is a 220-ton Allrounder 570A molding a two-component pad for an automotive rain sensor, that joins together a frame of polybutylene terephthalate. A Multilift Select robot places the premolded part into the mold and also removes the finished parts, molded with LSR in the second station. The flexible LSR component forms the connection to the car windshield, connecting the sensors to the windshield.

Four premolded parts and four finished components are produced in a 38-second cycle.

Arburg also is demonstrating in-mold labeling by molding two one-liter polypropylene buckets fully assembled with handles, in a cycle time of 4.8 seconds on a 350-ton, hybrid Allrounder Hidrive. Arburg has configured the injection unit for high performance. An extended 70-millimeter screw gives a high degree of plasticizing.

Arburg also shows a production cell that uses a six-axis Kuka robot that grabs lengths of cable, then moves it into a vertical Allrounder, which molds parts onto the completed wiring harness. The Selogica control screen links the robot to the machine controller. The cell eliminates the need for manual insertion of the cable into the mold.

In a micromolding application, a tiny Arburg press with an 8-mm screw, and a second screw to melt the material. The 38-ton Allrounder Alldrive press is molding micro-parts from polycarbonate in a 20-second cycle time.

Arburg also is showing a stainless steel molding 32 syringe barrels on a 165-ton all-electric Allrounder Alldrive. A clean-room module sits on top of the clamping unit room.

And Arburg is showing total mobile access to key parameters and production data in real time, through the new ALS Mobile analysis tool. A modular structure allows a molder to start with a basic platform, then expand it over time.


Comments

Arburg positions Edrive as hydraulic alternative

By Bill Bregar
Senior Staff Reporter

Published: April 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Image

Renners leaving Sumitomo (SHI) Demag

November 21, 2014 10:01 am ET

Christian Renners is leaving injection molding press manufacturer Sumitomo (SHI) Demag Plastics Machinery GmbH, the company announced Nov. 21.    More

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a Mexican...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events