China's Bluestar makes NPE debut

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 4, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 4, 8 a.m. ET) — Material supplier China National Bluestar (Group) Co. Ltd., which is 20 percent-owned by U.S. investment firm Blackstone Group, might at this point be a more familiar name to American banks than to American plastic buyers.

But the company (Booth 23051) hopes its inaugural appearance at NPE will change that.

The firm, which is part of state-owned China National Chemical Corp., has been on a modernizing push. It has restructured separately-run engineering plastics factories into a new business unit in February, hired two non-Chinese executives with international petrochemicals backgrounds to run the operation and is in the midst of adding capacity.

Jos Braat, who joined Beijing-based Bluestar in mid-2011 as chief commercial officer of the new engineering plastics business unit, said in an interview at the company’s NPE booth that it was both its first NPE show and the first time exhibiting its new engineering plastics on its own, at any trade show.

“This is the first time we’ve presented these products together as one company,” Braat said. “For us, this is an important show because our reach in the North American market is less.”

Braat came to Bluestar from Pittsfield, Mass-based SABIC, where he was global product marketing leader for crystalline and styrenic products. Bluestar also hired former Celanese executive Lanny Duvall in 2011 to be chief executive officer of the engineering plastics business unit.

The engineering polymers unit right now has about 4 billion Chinese yuan (US $635 million) in revenue, with 1,700 employees at four production sites, where it makes a wide-range of materials, including compounded engineering plastics, acetal, polyphenylene ether, polybutylene terephthalate and bisphenol-A.

It opened a new a 35,000 metric ton specialty epoxy resin plant in Nantong, Jiangsu Province, earlier this year and is building a 60,000 metric ton 1,4-butanediol and tetrahydrofuran plant in Nanjing, Jiangsu Province, the company said.

Braat said the firm is also considering other capacity expansions, including acetal, also known as POM, along with PBT and PPE.

At NPE the company was touting eco-friendly, flame retardant grades of glass-filled PBT, which are already being used by Foxconn International Holdings, the giant contract manufacturer that produces Apple iPads and other electronic products.

It also recently introduced a new additive for glass-filled PPE blends that it said has significant improvement on properties like tensile and flexural strength. Its glass-filled PPEs are sold into automotive, consumer product and fluid-handling applications.

Braat said the company has been focused on upgrading to become more efficient and competitive globally.

The investment by Blackstone, which bought 20 percent of Bluestar in 2007 for $600 million, has increased the pressure on Bluestar to become more efficient, but it’s a work in progress, he said.

“There are still a lot of things that need to be optimized,” Braat said. “ For the long-term viability it needs to be more internationalized.”

About 75 percent of the engineering business unit’s revenues come from China, but the company wants to focus more on exports, which are growing faster than domestic Chinese sales.

The company manufactures thermoplastic, thermosets and raw materials serving those industries globally, and says it is the only producer of PPE in China.


Comments

China's Bluestar makes NPE debut

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion —...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Taipei Plas vandal and German firm trade lawsuits

November 25, 2014 1:26 pm ET

Taiwan businessman Karma Tang, who splashed red paint at German firm Baumüller GmbH's Taipei Plas booth, is in a messy legal battle.    More

Image

Auxiliary equipment maker Ross expands in India

November 25, 2014 1:12 pm ET

U.S. auxiliary equipment maker Charles Ross & Son Co. is expanding in India, opening a new plant early next year in Pune.    More

Image

3D Systems buying Cimatron

November 24, 2014 1:46 pm ET

3D Systems Corp. is buying Cimatron Ltd., an Israel-based company that makes integrated computer-assisted design and manufacturing software, for $97 m...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events