Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 5, 6:35 p.m. ET) — Brazilian resins giant Braskem SA is seeing continued growth with its sugar-based Green polyethylene ad also is advancing with joint venture expansion plans in Mexico.

As if that wasn’t enough, the Sao Paulo-based firm also is dealing with a polypropylene feedstocks supply issue while digesting the purchase of two separate PP businesses.

Green PE “is a very interesting niche product,” Braskem America chief executive officer Fernando Musa said in an interview at NPE 2012. “It’s been sold mostly into packaging markets. There’s a lot of demand in Asia, but demand in North America is growing as well.”

Braskem’s initial 440 million pound-capacity plant in Brazil already is operating at more than half of capacity, and the firm is studying a second plant there as well. A pilot plant making sugar-based Green PP also is in the works.

In Mexico, construction has begun on Ethylene XXI, a massive joint venture that when completed will have more than two billion pounds of annual capacity for high density and low density PE and a similar amount of capacity for ethylene feedstock. The project – a JV between Braskem and Mexican conglomerate Grupo Idesa SA de CV – is expected to create 3,000 permanent jobs.

Ethylene XXI is set to be operational in mid-2015, but Musa said that officials “are trying to make it sooner.”

Braskem’s big splash into the North American PP world has come in the last two years, when it’s bought the PP businesses of Sunoco Inc. and Dow Chemical Co., immediately making Braskem one of North America’s largest PP makers.

But that status hasn’t come without its challenges, since volatility in supplies of propylene monomer have sent PP pricing haywire, causing processors to look at other materials in some cases. On top of that, Braskem was dealt a blow when Sunoco in December closed a gasoline refinery in Marcus Hook, Pa., that had been supplying the Braskem PP plant there with propylene.

Braskem America commercial and supply vice president Robert Nadin said the situation in Marcus Hook isn’t as dire as it first appeared. Although Sunoco was the plant’s largest propylene supplier, it never supplied even half of the plant’s needs. Since the refinery closed, Braskem already has been contacted by several suppliers looking to fill the plant’s propylene requirements, Nadin said.

Longer-term, Nadin said that North American PP demand growth should rebound and average 2-3 percent for the next several years. “We’ll see strength in segments like automotive and packaging, where polypropylene is the material of choice,” he added.

Musa added that the amount of on-purpose propylene being made in North America “should increase drastically in just the next three years, which should improve the supply situation and hopefully reduce price volatility. He said Braskem currently has no plans to enter into on-purpose propylene production.

Braskem materials are being run by several companies at NPE 2012, including:

* Bekum America Corp. blow molding bottles using Green PE in Booth 2163.

* Davis Standard running Green PE on a cast film line in Booth 5945.

* BMB Spa injection molding high melt flow PP in Booth 323.

* Boy Machines Inc. molding PP in Booth 2819, demonstrating high clarity for eye glass frames.

* Milacron LLC is running clarified random copolymer PP to produce houseware lids in Booth 2803.


Comments

Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

FTC warns bag makers to take care before making biodegradeability claims

October 23, 2014 12:30 pm ET

Makers of oxodegradable or oxo-biodegradable plastic bags should consider themselves on notice, according to the U.S. Federal Trade Commission.    More

Image

Packaging specialist Amcor hits sustainability goals ahead of schedule

October 23, 2014 11:15 am ET

Global packaging company Amcor Ltd. has achieved its waste reduction goals two years ahead of schedule, according to the company's new sustainability ...    More

Image

Total picks new management following CEO's death in crash

October 23, 2014 11:03 am ET

Total SA has picked a new management team to oversee the company in the wake of a plane crash in Moscow that killed its chairman and CEO earlier this ...    More

Image

Report: Private equity companies may seek to buy Bayer MaterialScience

October 23, 2014 10:56 am ET

A number of investment groups are reported to be interested buying Bayer AG's MaterialScience operation, valued at around 10 billion euros ($12.6...    More

Image

Plastics lead Dow's quarterly growth

October 23, 2014 10:15 am ET

Dow Chemical Co. has announced its third quarter results for 2014 showing a 5 percent increase on the third quarter of 2013, rising to $14.4 billion f...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events