Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, NPE 2012

ORLANDO, FLA. (April 5, 6:35 p.m. ET) — Brazilian resins giant Braskem SA is seeing continued growth with its sugar-based Green polyethylene ad also is advancing with joint venture expansion plans in Mexico.

As if that wasn’t enough, the Sao Paulo-based firm also is dealing with a polypropylene feedstocks supply issue while digesting the purchase of two separate PP businesses.

Green PE “is a very interesting niche product,” Braskem America chief executive officer Fernando Musa said in an interview at NPE 2012. “It’s been sold mostly into packaging markets. There’s a lot of demand in Asia, but demand in North America is growing as well.”

Braskem’s initial 440 million pound-capacity plant in Brazil already is operating at more than half of capacity, and the firm is studying a second plant there as well. A pilot plant making sugar-based Green PP also is in the works.

In Mexico, construction has begun on Ethylene XXI, a massive joint venture that when completed will have more than two billion pounds of annual capacity for high density and low density PE and a similar amount of capacity for ethylene feedstock. The project – a JV between Braskem and Mexican conglomerate Grupo Idesa SA de CV – is expected to create 3,000 permanent jobs.

Ethylene XXI is set to be operational in mid-2015, but Musa said that officials “are trying to make it sooner.”

Braskem’s big splash into the North American PP world has come in the last two years, when it’s bought the PP businesses of Sunoco Inc. and Dow Chemical Co., immediately making Braskem one of North America’s largest PP makers.

But that status hasn’t come without its challenges, since volatility in supplies of propylene monomer have sent PP pricing haywire, causing processors to look at other materials in some cases. On top of that, Braskem was dealt a blow when Sunoco in December closed a gasoline refinery in Marcus Hook, Pa., that had been supplying the Braskem PP plant there with propylene.

Braskem America commercial and supply vice president Robert Nadin said the situation in Marcus Hook isn’t as dire as it first appeared. Although Sunoco was the plant’s largest propylene supplier, it never supplied even half of the plant’s needs. Since the refinery closed, Braskem already has been contacted by several suppliers looking to fill the plant’s propylene requirements, Nadin said.

Longer-term, Nadin said that North American PP demand growth should rebound and average 2-3 percent for the next several years. “We’ll see strength in segments like automotive and packaging, where polypropylene is the material of choice,” he added.

Musa added that the amount of on-purpose propylene being made in North America “should increase drastically in just the next three years, which should improve the supply situation and hopefully reduce price volatility. He said Braskem currently has no plans to enter into on-purpose propylene production.

Braskem materials are being run by several companies at NPE 2012, including:

* Bekum America Corp. blow molding bottles using Green PE in Booth 2163.

* Davis Standard running Green PE on a cast film line in Booth 5945.

* BMB Spa injection molding high melt flow PP in Booth 323.

* Boy Machines Inc. molding PP in Booth 2819, demonstrating high clarity for eye glass frames.

* Milacron LLC is running clarified random copolymer PP to produce houseware lids in Booth 2803.


Comments

Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Lumena suspends trading, delays report amid claims of 'misrepresenting' financials

April 18, 2014 10:19 am ET

China Lumena New Materials Corp., which says it has the world's largest manufacturing capacity for polyphenylene sulfide resin, has suspended its...    More

PolyQuest spins off FiberQuest unit

April 18, 2014 10:14 am ET

PolyQuest Inc. has spun off its FiberQuest unit — which distributes polyester staple fibers and cotton — as a separate company.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events