Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Suppliers, NPE 2012

ORLANDO, FLA. (April 5, 6:35 p.m. ET) — Brazilian resins giant Braskem SA is seeing continued growth with its sugar-based Green polyethylene ad also is advancing with joint venture expansion plans in Mexico.

As if that wasn’t enough, the Sao Paulo-based firm also is dealing with a polypropylene feedstocks supply issue while digesting the purchase of two separate PP businesses.

Green PE “is a very interesting niche product,” Braskem America chief executive officer Fernando Musa said in an interview at NPE 2012. “It’s been sold mostly into packaging markets. There’s a lot of demand in Asia, but demand in North America is growing as well.”

Braskem’s initial 440 million pound-capacity plant in Brazil already is operating at more than half of capacity, and the firm is studying a second plant there as well. A pilot plant making sugar-based Green PP also is in the works.

In Mexico, construction has begun on Ethylene XXI, a massive joint venture that when completed will have more than two billion pounds of annual capacity for high density and low density PE and a similar amount of capacity for ethylene feedstock. The project – a JV between Braskem and Mexican conglomerate Grupo Idesa SA de CV – is expected to create 3,000 permanent jobs.

Ethylene XXI is set to be operational in mid-2015, but Musa said that officials “are trying to make it sooner.”

Braskem’s big splash into the North American PP world has come in the last two years, when it’s bought the PP businesses of Sunoco Inc. and Dow Chemical Co., immediately making Braskem one of North America’s largest PP makers.

But that status hasn’t come without its challenges, since volatility in supplies of propylene monomer have sent PP pricing haywire, causing processors to look at other materials in some cases. On top of that, Braskem was dealt a blow when Sunoco in December closed a gasoline refinery in Marcus Hook, Pa., that had been supplying the Braskem PP plant there with propylene.

Braskem America commercial and supply vice president Robert Nadin said the situation in Marcus Hook isn’t as dire as it first appeared. Although Sunoco was the plant’s largest propylene supplier, it never supplied even half of the plant’s needs. Since the refinery closed, Braskem already has been contacted by several suppliers looking to fill the plant’s propylene requirements, Nadin said.

Longer-term, Nadin said that North American PP demand growth should rebound and average 2-3 percent for the next several years. “We’ll see strength in segments like automotive and packaging, where polypropylene is the material of choice,” he added.

Musa added that the amount of on-purpose propylene being made in North America “should increase drastically in just the next three years, which should improve the supply situation and hopefully reduce price volatility. He said Braskem currently has no plans to enter into on-purpose propylene production.

Braskem materials are being run by several companies at NPE 2012, including:

* Bekum America Corp. blow molding bottles using Green PE in Booth 2163.

* Davis Standard running Green PE on a cast film line in Booth 5945.

* BMB Spa injection molding high melt flow PP in Booth 323.

* Boy Machines Inc. molding PP in Booth 2819, demonstrating high clarity for eye glass frames.

* Milacron LLC is running clarified random copolymer PP to produce houseware lids in Booth 2803.


Comments

Green PE a boon for Braskem

By Frank Esposito
Senior Staff Reporter

Published: April 5, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Plastics industry blasted for stance in green building debate

July 22, 2014 2:45 pm ET

The plastics industry has taken high-profile stance in the debate over green building standards. The result, today at least, is that it's getting...    More

Image

Plastics help designers bring home the gold

July 22, 2014 2:15 pm ET

Products with polymer content received multiple gold recognitions in the 2014 International Design Excellence Awards.    More

Image

Munson Machinery expanding assembly, testing operations

July 22, 2014 2:02 pm ET

Munson Machinery Co. Inc. is expanding its headquarters factory by about one-third in Utica, N.Y., where the company makes mixing, blending and size-...    More

Image

Evolving with the times helps Ohio's Midwest Elastomers prosper

July 22, 2014 12:53 pm ET

Midwest Elastomers Inc. is 35 years old this year, and if the company hadn't abandoned its roots and evolved, it long ago could have gone the way of...    More

Image

DSM planning North American nylon plant

July 22, 2014 11:41 am ET

Materials firm Royal DSM NV plans to build a new nylon resin plant in North America, but no decision has been made on the plant's exact location.    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events