Chief sees SPI agenda succeeding

Mike Verespej

Published: April 9, 2012 6:00 am ET

Related to this story

Topics Public Policy, Sustainability, Recycling, NPE 2012

ORLANDO, FLA. (April 9, 1:50 p.m. ET) — There is no doubt in Bill Carteaux’s mind that the Society of the Plastics Inc. is doing a better job of addressing both its member needs and pressing industry issues than it did three years ago when budget issues forced the trade group to lay off about 12 people, reducing its staff to 38.

The staff is slowly being rebuilt, up to 42 or 43, said Carteaux, SPI’s president and CEO. Washington-based SPI, the U.S. plastic industry’s largest association, puts on the triennial NPE show, held last week in Orlando. It was the first time in 40 years that the show did not take place in Chicago.

In addition, Carteaux said SPI has assumed a larger role in advocacy and public policy for its members, which often happens as an industry matures.

“As the industry matures, people are realizing that advocacy is more and more what we have to do,” Carteaux said in an April 5 interview in his show office at NPE2012. “Today, the issue may be plastic bags, but they know that tomorrow it could be their product.”

Also, fewer SPI members have government relations staff than seven years ago when Carteaux joined SPI. “As a result, we’ve become the de facto go-to guy” to deal with federal government, legislators and regulators, and state officials.

SPI has had to rethink how it uses its staff, he said. Now, specific people are focused on certain tasks or on specific government agencies.

“When an issue comes up, we have an expert who can run with it, not a generalist,” said Carteaux.

He said SPI has someone who deals with the Food and Drug Administration, someone who deals with the Occupational Safety and Health Administration, someone who deals with the Environmental Protection Agency, and someone who deals with the Department of Energy. “By agency, we can tell you who is the contact point,” Carteaux said.

In keeping with that, the association added Michael Taylor as international trade director 18 months ago. “ He has given SPI someone with a different skill set on international trade who has strengthened our relationship with other trade organizations,” Carteaux said. He added that Taylor advocated the need to sign the free trade agreement with South Korea, Columbia and Panama — which were finally signed last fall by the Obama administration.

From an “effectiveness standpoint,” he said, SPI has brought in people to support senior staff, so those senior-level staffers “can stay in touch with members and their key issues.”

“When an issue comes up now, we can run it through filters and address it quickly. We’ve also streamlined how we disseminate information to make it easier for it to be dissected,” he said.

Carteaux said that approach to handling issues for members evolved from SPI’s reorganization three years ago.

“We recognized that we couldn’t be all things to all people and that we had to take a look at the organization. … When we took a hard look, we found that we had groups within SPI that had been formed for legitimate purposes” but for which there was no longer a legitimate need, he said.

“We made the difficult decision that they needed to go and decided to focus around three key areas: advocacy and public policy, trade shows and conferences, and communications and marketing. In all of those areas, the staff has been more effective and is now focusing on things the members said to work on,” said Carteaux. “We also added additional resources to our grass-roots network and ways to make it easier for our members to make phone calls and write letters to legislators.”

Compared to seven years ago when he moved into the top spot at SPI, the pace of anti-plastic activity has accelerated, he said.

“There are a lot of activists out there who want to get rid of all plastics and more people realize that we need to be engaged,” both as an industry and as individuals, Carteaux said. 

He has worked — and said he has convinced — equipment manufacturers to get involved. “They are doing a lot of plant tours and supporting what we do financially,” he said. That includes SPI’s newest area of advocacy: plastics bags. “They see value of maintaining their customers’ markets,” Carteaux said.

In January, that task and the group shifted from the American Chemistry Council to SPI, which renamed it the American Progressive Bag Alliance. The group is now headed by Dave Asselin, its executive director who was formerly vice president of allied associations at the National Association of Manufacturers.

The bag alliance, still in its early stages, has five to six full-time members, Carteaux said.

“We are being very aggressive on that issue,” he said. “We have filed petitions with local governments to find out where they are getting their information, and I have talked and issued statements on why plastic bags are better than paper bags and positioned the sustainability solution — and not a bad thing.”

The bag alliance has used the SPI database on jobs and plastic industry statistics to outline and explain the number of jobs the plastic bag industry provides in areas where legislators are considering bans.

“We can go into a municipality and talk about actual jobs and the economic value of the plastic bag industry,” he said. “I don’t think we ever realized how the size and the impact of the plastics industry can help us” deal with this issue.

He said he expects SPI to get more heavily involved in recycling, noting that the three grants it issued for a recycling pilot project for thermoformed containers is just the beginning of the group’s planned initiatives for recycling. “Recycling is going to be a bigger part of what we do,” he said.

Like many other associations, SPI has dramatically increased its social network presence and hired a full-time person to respond to information that appears on blogs and websites. It is also doing a lot more Web meetings and putting together Web seminars for SPI members.

“We have a lot of pro-plastics activity going on to put out positive messages about how plastics improve everyday life,” Carteaux said.

He added that the cooperation between the major plastics association has given the industry a boost. “When we share information and coordinate messages, we’re a lot stronger as an industry because we have a unified message and can do it for less cost. And by coordinating efforts, we’re not duplicating efforts.”

Carteaux also said that he was pleased with the show and with the helpfulness of the city in Orlando, which hosted NPE2012 from April 1-5.

“What pleased me is the outpouring of support from Orlando from the time NPE visitors got to the airport to when they got back to the airport,” said Carteaux. “And the biggest area of compliments we got from attendees and exhibitors, outside of the show itself, was the friendliness of the cab drivers.”

He pointed out that the city spent $4 million for electrical improvements for NPE.

But, he also adds that one area SPI did not address ahead of time for this year’s show was “Internet service and cost.”

“With the expansion of people using the Internet in their booths, we have to address that issue” before NPE 2015, he said.


Comments

Chief sees SPI agenda succeeding

Mike Verespej

Published: April 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Non-recyclable items gumming up the works at recycling centers

August 21, 2014 3:46 pm ET

The influx of all sorts of unacceptable items at recycling centers has gotten to the point that Charlotte, N.C.-based ReCommunity is trying to bring...    More

Image

Investment firm specializes in emerging polymer firms in Ohio

August 21, 2014 3:20 pm ET

A plastics market veteran is working with an investment firm and a research foundation to help commercialize polymer technology in the Buckeye State.    More

Image

Bayer, SCAC partner on water reuse project

August 21, 2014 12:48 pm ET

Bayer MaterialScience (BMS) and Shanghai Chlor-Alkali Chemical Co. Ltd. (SCAC) have entered into a preliminary agreement for the reuse of waste water ...    More

Image

Automakers look under the hood for the next lightweighting opportunities

August 20, 2014 1:06 pm ET

The automotive industry's current favorite target for lightweighting efforts is the powertrain, according to a recent survey.    More

Image

Small country introducing plastic coins

August 20, 2014 10:48 am ET

You've heard of countries adopting plastic currency, to replace paper money. How about plastic coins, to replace metal? It's hard to believe but true....    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events