Linde unveils improved pressure booster

By Roger Renstrom
Correspondent

Published: April 16, 2012 6:00 am ET

Related to this story

Topics Machinery, Product News, NPE 2012

ORLANDO, FLA. (April 16, 1:10 p.m. ET) — Linde LLC introduced a Presus N10 high-pressure liquid-nitrogen pressure booster at NPE2012 to help gas-assist injection molders improve efficiency and quality.

Parent firm Linde AG, an international industrial gases and engineering company, conducted beta tests with potential customers in Germany, the Czech Republic and Poland after one site conducted trials with a prototype beginning in 2010.

In the initial test, injection molder Engel Formenbau und Spritzguss GmbH of Sinsheim, Germany, worked with the Presus N10 prototype in an effort to reduce scrap and downtimes and shorten cycle times.

“We are seeing interest in the pressure-boosting device,” said Andreas Praller, plastics industry applications manager for Linde in Unterschleissheim, Germany.

The liquid pump can boost nitrogen to 4,500 pounds per square inch and deliver flow rates up to 4,600 cubic feet per hour. The highest flow rate is about five times higher than state-of-the-art gas compressors.

Separately, Linde in North America targets manufacturers of extruded polystyrene foam for a precise-dosing 7,250-pounds-per-square-inch metering system.

Linde’s patented DSD 500 system reduces the use of hydrofluorocarbon and hydrochlorofluorocarbon blowing agents with the controlled addition of precise amounts of carbon dioxide through a proportional control valve. The system keeps carbon dioxide gas consumption low.

Many foam manufacturers in Europe use the DSD 500 system and related pressure boosters.

Linde makes it easy for foam manufacturers to capitalize on the advantages of using carbon dioxide while avoiding hydrocarbon foaming agents, said James Stanley, recently named program manager for industrial applications with Linde LLC in Murray Hill, N.J.

The company offers a way for spot cooling of injection molds with liquid carbon dioxide as a supplement to conventional cooling.

The system can cool hot spots in a mold and improve production of very thin parts, molds with small cores or areas with material accumulations. Use of carbon dioxide can reduce cooling and cycle times, perhaps as much as 50 percent.

Linde provides the spot cooling feature to automotive makers in Europe and is starting to introduce the concept to those in the U.S. automotive and medical markets.

Linde’s development of the spot cooling technology began about six years ago, but “we needed to convince customers that it gives them more flexibility,” Praller said.

For the plastics industry, Linde’s cryogenic gas technology can provide rapid cooling using an inert gas such as carbon dioxide or nitrogen for molding, extruding and foaming applications.

Globally, Munich-based Linde employs about 50,500 and had 2011 sales of 13.9 billion euros ($18.1 billion).

Presus N10 high-pressure liquid-nitrogen pressure booster aids gas-assist injection molders


Comments

Linde unveils improved pressure booster

By Roger Renstrom
Correspondent

Published: April 16, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Battenfeld-Cincinnati secures major Chinese extruder deal

September 2, 2014 10:58 am ET

An undisclosed major Chinese pipe manufacturer has ordered 25 extruders from German-Austrian company Battenfeld-Cincinnati's subsidiary, Battenfeld-...    More

Image

Haitian's standardization efforts paying off

August 29, 2014 9:53 am ET

Streamlined design efforts and robust export sales helped propel Ningbo, China-based injection molding machine manufacturer Haitian International...    More

Image

American Starlinger-Sahm begins work on new US headquarters

August 29, 2014 10:18 am ET

American Starlinger-Sahm Inc., which sells equipment for woven plastic bag production, PET recycling equipment, sheet extrusion and laminating lines...    More

Image

Sidel opens training center in Mexico

August 29, 2014 9:00 am ET

Swiss machinery company Sidel Group has opened a new training center in Guadalajara, Mexico, featuring a virtual factory environment, augmented...    More

Broad spectrum purging compound from Shuman

August 27, 2014 9:39 am ET

Shuman Plastics Inc. has developed a broad-purpose purging compound suited to a variety of processing conditions in injection and blow molding, extrus...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events