Linde unveils improved pressure booster

By Roger Renstrom
Correspondent

Published: April 16, 2012 6:00 am ET

Related to this story

Topics Machinery, Product News, NPE 2012

ORLANDO, FLA. (April 16, 1:10 p.m. ET) — Linde LLC introduced a Presus N10 high-pressure liquid-nitrogen pressure booster at NPE2012 to help gas-assist injection molders improve efficiency and quality.

Parent firm Linde AG, an international industrial gases and engineering company, conducted beta tests with potential customers in Germany, the Czech Republic and Poland after one site conducted trials with a prototype beginning in 2010.

In the initial test, injection molder Engel Formenbau und Spritzguss GmbH of Sinsheim, Germany, worked with the Presus N10 prototype in an effort to reduce scrap and downtimes and shorten cycle times.

“We are seeing interest in the pressure-boosting device,” said Andreas Praller, plastics industry applications manager for Linde in Unterschleissheim, Germany.

The liquid pump can boost nitrogen to 4,500 pounds per square inch and deliver flow rates up to 4,600 cubic feet per hour. The highest flow rate is about five times higher than state-of-the-art gas compressors.

Separately, Linde in North America targets manufacturers of extruded polystyrene foam for a precise-dosing 7,250-pounds-per-square-inch metering system.

Linde’s patented DSD 500 system reduces the use of hydrofluorocarbon and hydrochlorofluorocarbon blowing agents with the controlled addition of precise amounts of carbon dioxide through a proportional control valve. The system keeps carbon dioxide gas consumption low.

Many foam manufacturers in Europe use the DSD 500 system and related pressure boosters.

Linde makes it easy for foam manufacturers to capitalize on the advantages of using carbon dioxide while avoiding hydrocarbon foaming agents, said James Stanley, recently named program manager for industrial applications with Linde LLC in Murray Hill, N.J.

The company offers a way for spot cooling of injection molds with liquid carbon dioxide as a supplement to conventional cooling.

The system can cool hot spots in a mold and improve production of very thin parts, molds with small cores or areas with material accumulations. Use of carbon dioxide can reduce cooling and cycle times, perhaps as much as 50 percent.

Linde provides the spot cooling feature to automotive makers in Europe and is starting to introduce the concept to those in the U.S. automotive and medical markets.

Linde’s development of the spot cooling technology began about six years ago, but “we needed to convince customers that it gives them more flexibility,” Praller said.

For the plastics industry, Linde’s cryogenic gas technology can provide rapid cooling using an inert gas such as carbon dioxide or nitrogen for molding, extruding and foaming applications.

Globally, Munich-based Linde employs about 50,500 and had 2011 sales of 13.9 billion euros ($18.1 billion).

Presus N10 high-pressure liquid-nitrogen pressure booster aids gas-assist injection molders


Comments

Linde unveils improved pressure booster

By Roger Renstrom
Correspondent

Published: April 16, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Clariant's ColorForward predicts future consumer trends

January 23, 2015 1:33 pm ET

Clariant International Ltd. is marking a decade of color forecasting with the 10th edition of its ColorForward program.    More

Image

The future for PolyOne is colorful

January 23, 2015 1:28 pm ET

PolyOne Corp. is writing four color stories for 2016.    More

Image

Gerd Liebig returns to Demag business

January 19, 2015 8:33 am ET

UPDATED — Gerd Liebig, the former head marketing manager of Engel Holding GmbH, has been appointed managing director-chief sales officer at...    More

Image

Expect to see Baxter's 'face' in more plants this year

January 16, 2015 12:32 pm ET

Expect many more Baxters working on the manufacturing floor this year.    More

Image

Romi drops the Sandretto badge

January 16, 2015 12:26 pm ET

Brazilian injection molding machinery group Indústrias Romi SA is dropping the Sandretto badge from the beginning of this year.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events