Dr. Schneider opens first Asia site

By Robert Grace
Associate Publisher & Business Development Director

Published: May 1, 2012 6:00 am ET

Related to this story

Topics Automotive, Injection Molding

BEIJING (May 1, 3:30 p.m. ET) — German automotive plastics supplier Dr. Schneider Group officially opened its first Asian plant April 26 in the northeastern Chinese city of Liaoyang. Company leaders discussed the development on the day prior in Beijing, where the firm was exhibiting at the Automotive News China Conference.

The facility will begin by assembling plastic molded cosmetic mirrors for two lines of BMW cars – the 3 Series and 5 Series – said Klaus Fricke, president and CEO of Dr. Schneider Holding GmbH. Fricke said his firm has rented space in an existing facility from a local partner, and refitted it to match the layout of its other plants in Germany and elsewhere. The group has been represented in China for many years by a sales and sourcing office.

Yubo Wang has been named managing director of the Chinese operation, officially named Dr. Schneider Automotive Parts (Liaoyang) Co. Ltd.

The hinged housings for the mirrors are made from a polycarbonate/ABS resin blend, and are ceiling mounted in the vehicles. Fricke said he anticipates output of 12,000 mirrors a month from the Liaoyang plant. The components will be imported from Germany until the company starts molding them in China.

Plans are to invest 2.5 million euros in the new facility by the end of 2014, he said. Phase two of the project will involve installing an unspecified number of injection molding presses within the same time frame. Dr. Schneider currently runs 353 injection presses worldwide and uses primarily KraussMaffei and Engel models. The project’s third phase will add painting capabilities – but not before 2015, Fricke said.

The new plant now has about 30 assembly workstations and began training workers and installing equipment in December. Fricke says the Chinese workers are every bit as good, quality-wise, as their German counterparts. He expects the plant to employ a work force of 100 once the operation adds molding capabilities.

The resin is at least as expensive in China as is Europe, Fricke noted, but he still does not rule out the possibility that the China plant eventually could mold and assemble parts such as the mirrors and cost-effectively ship them back to Germany. The goal is for the group to make in Liaoyang all the components that it produces for the Chinese market, he said.

Based in the Bavarian town of Kronach-Neuses, Dr. Schneider Group makes a variety automotive components such as air vent systems, cup holders, door frames, center consoles and instrument panel modules. Founded in 1927 and still family owned, the firm counts as customers automakers such as Audi, BMW, Jaguar/Land Rover, Mercedes, Porsche and Rolls-Royce. It has production at four plants in Germany, as well as in Brazil, Slovakia, Spain, Poland and the United States.

The company continues to look to emerging markets for growth. As previously reported by Automotive News Europe, Dr. Schneider in late January confirmed plans to invest another 2.5 million euros to build a new, 100-employee plant in Zacatecas, Mexico. Construction will begin this fall, with production due to start next spring. Fricke confirmed those plans remain on track, and that the Mexico plant will be affiliated with the company’s U.S. factory in Howell, Mich.

Dr. Schneider Group reported a 12.1 percent increase in 2011 sales, to 314 million euros ($415 million), from 280 million euros in 2010. The company employs about 2,800 employees worldwide.


Comments

Dr. Schneider opens first Asia site

By Robert Grace
Associate Publisher & Business Development Director

Published: May 1, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Adding flavor to capture sales

April 16, 2014 4:03 pm ET

Water bottles increasingly are designed and molded with filters and infusers to hold fruit, vegetables or herbs to give water a different taste.    More

Huntingdon Fiberglass launching second line

April 16, 2014 2:18 pm ET

Huntingdon Fiberglass Products LLC is getting set to start up a second production line later this year and hire 15-20 new employees as it sees demand ...    More

New Tigre, ADS JV aims to open more doors for Tigre in US

April 16, 2014 12:15 pm ET

A new joint venture between Tigre S.A. Brazil, a leading PVC pipe maker, and Advanced Drainage Systems Inc., the world's largest high-density...    More

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Mexico reports rising auto production

April 14, 2014 1:18 pm ET

MEXICO CITY — Mexico’s automotive industry assembled an unprecedented 774,731 light vehicles in the first quarter, 6.5 percent up on the 7...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events