Erema expects strong sales to continue

Mike Verespej

Published: May 9, 2012 6:00 am ET

Related to this story

Topics Sustainability, Recycling, Machinery, Product News, NPE 2012

ORLANDO, FLA. (May 9, 3:30 p.m. ET) — Erema North America Inc. CEO Tim Hanrahan said he expects a sales increase of 25-30 percent in 2012, on the heels of a 40-50 percent sales increase in 2011.

“Our business is way up,” said Hanrahan of the Ipswich-Mass.-based distributor, spare parts and service arm of recycling equipment maker Erema Engineering Recycling Maschinen und Anlagen GmbH.

“The green movement is strong. The interest in recycling continues to grow. We expect to continue to grow.”

Indeed, the growth of Erema in the U.S. even outstripped the 40 percent year-over-year growth in the fiscal year that ended March 31 for its Ansfelden, Austria-based parent, which reported record sales of 115 million euros ($153 million using the March 31 exchange rate).

Erema Austria said it produced 200 recycling systems and 100 individual components, such as screen changers and pelletizers, in the just-completed fiscal year.

“We have been busy at the show with a steady flow of customers all week,” virtually all of them upbeat, said Hanrahan in an interview at NPE2012 in Orlando. “If everyone in the United States was in the plastics machinery business, the economy wouldn’t be in a slump. It’s almost like we’re operating in a bubble.”

He said that in the first three days of the show, held April 1-5, the company already had sold two machines, and expected to sell two more that day.

The 400 Erema systems installed in North America produce more than 1 billion pounds of recycled resin annually, the company said.

Its largest — and most expensive piece of recycling equipment, the $1 million Erema TVEplus extruder system — was on display for the first time in the U.S, showing improvements made about a year ago, said Hanrahan.

“We already have a few of them sold and operating in the U.S,” he said. Among the customers: recyclers Rainier Plastics Inc. in Yakima, Wash., and Jadcore Inc. in Terre Haute, Ind., which bought the model on display at the show.

The TVEplus — aimed at recyclers of polyolefins and polyethylene — has a new horizontal centrifugal dryer. In addition, the screen changer was moved closer to the feeder, which enabled Erema to put a mixer section between the screen changer and the vent section.

“That significantly improves the de-gassing efficiency,” he said.

That high-performance degassing, in combination with thorough melt homogenization, permits users to achieve ultrafine filtration, according to Erema. Up to 12 percent residual moisture can be processed with consistently high output because of the system’s patented Double Disc technology.

The TVEplus technology sets new standards when recycling severely contaminated post-consumer waste and heavily printed and laminated film packaging in-house, said Hanrahan.

“The TVEplus is primarily aimed at heavily inked material or any material, such as foamed material, that would create gas when melted,” he said.

An example of heavily inked material is the Zip-Loc bag made by S.C. Johnson & Son Inc. and similar products. ‘This is the type of material that has to be recycled and that wasn’t even on the retail shelves 10-12 years ago,” Hanrahan said.

“Because everyone [who makes heavily inked film] now has their own recycling machine in-house, the material that plastics recyclers are getting is dirtier and gassier. They are bottom-feeding to get materials to recycle, compared to 10-12 years ago,” he said.

“In the old days, they were able to get clean film scrap.”

Hanrahan said he believes the future for recycling, and recycling equipment, will only be brighter in years to come.

“There are some materials that are just starting to be recycled, and the biggest upside will be polyester, particularly PET, for which Erema sells its Vacurema recycling system,” he said. More than 140 such systems are in use worldwide.

Erema Austria said that around 1 million tons of PET flakes are recycled in Europe every year — more than a third using Vacurema. In 2011 alone, four large-scale Vacurema Prime systems were supplied to the U.S., he said.


Comments

Erema expects strong sales to continue

Mike Verespej

Published: May 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135...    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gra signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade...    More

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co.,...    More

Red Wave machine helps sort 4,000 metric tons of mixed plastics recycling

July 30, 2014 11:00 am ET

Redwave, the Austrian manufacturer of optical sorting machines for recycled plastics, supplied a line for the IMOG sorting facility in South West Flan...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events