Persico offers electric Leonardo machines

By Bill Bregar
Senior Staff Reporter

Published: May 15, 2012 6:00 am ET

Related to this story

Topics Rotomolding, Machinery

CLEVELAND (May 15, 4:15 p.m. ET) — Persico SpA is rolling out the next generation of its fully automated Leonardo rotational molding machines, which use electricity for heating and cooling the molds directly, instead of oil.

The Italian company conducted extensive research and development before making the change, said a company official, Sergio Zilioli, in a presentation May 7 at the Society of Plastics Engineers’ rotomolding TopCon in Cleveland.

“We found out that with electrical resistance applied to the molds, we get a benefit that we can’t get with oil,” said Zilioli, Persico sales manager for the United States and Brazil.

The machinery maker in Nembro, Italy, currently is building two of the new electric machines for customers in Germany, one each for Italy and France, he said. Persico is in “deep discussion” with customers in the Unites States and Brazil.

Leonardo is a major innovation for rotomolding. Instead of cycling a turning mold through an oven, then a cooling station before manual part removal, Leonardo heats and cools the mold right at the mold surface. Initially, the machines used heated and chilled oil pumped through channels machined in the mold—and Zilioli said Persico has installed five of these machines that use oil heating and cooling in the United States and two in Australia and 35 in Europe, mostly in Italy.

The machines are highly automated, loading the resin, loading the mold with resin, opening and closing the mold and removing parts. The mold is held under vacuum to remove bubbles and pinholes.

But now, Persico uses a series of resistors applied directly to the mold surface, for heating and cooling.

At the SPE rotomolding conference, Zilioli gave a case study of a Finnish maker of organic waste composters and dry toilets that has purchased a Leonardo to make 15,000 bodies and lids a year.

Persico installed a fully automatic, turnkey system: a Leonardo machine and molds, robots and equipment that automatically applies a sealing gasket. Persico engineers incorporated the customer’s existing machine to foam the hollow parts with polyurethane insulation into the manufacturing cell. The total investment was about 2 million euros ($2.5 million), he said.

“It was a big project for the customer. They were previously buying the parts from a custom molder, and they decided to bring inside the production of the parts with the highest volumes,” Zilioli said. “But they decided to approach it in a different way—not with a conventional machine but with a Leonardo, because this company is very sensitive to the environment, from the product line and also from the company policy.”

The efficient electric mold technology reduces energy savings, he said. Also, there is no need to pre-heat any oil, or change oil.

The customer in Finland, who Zilioli did not identify, also is building a wind turbine next to its factory to power the Leonardo and the plant’s lighting.

The bodies of the composter and toilers remain on the bottom of the mold once it’s opened. A robot moves the parts into a cooling station. Later, a robot moves them to the automated foaming area.

After his speech, Zilioli said Persico will still make oil machines for existing customers, but officials are pushing the electric molds as the second generation Leonardos.


Comments

Persico offers electric Leonardo machines

By Bill Bregar
Senior Staff Reporter

Published: May 15, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Humanoid robot provides inspection service with a smile

October 17, 2014 6:00 am ET

Everyone knows robots can improve production and quality. But no one says they can't show a little personality while they're working.    More

Image

Ameriform plans $7.5 million expansion

October 16, 2014 12:57 pm ET

Ameriform Inc. has earmarked $7.5 million to expand its thermoforming, extrusion and rotational molding operations in Muskegon, Mich.    More

Image

Arburg starts taking orders for Freeformer

October 15, 2014 12:52 pm ET

FRIEDRICHSHAFEN, GERMANY — For fans of 3-D printing, Fakuma 2014 marks an important date: Arburg is taking German orders for the Freeformer.    More

Image

Taiwan's machinery makers look to speed development of all-electrics

October 15, 2014 11:25 am ET

Taiwan's large plastics machinery industry faces a challenge — less than 10 percent of its equipment uses the more eco-friendly all-electric...    More

Image

iPhone 6, other smartphones may boost Taiwan's plastics market for late 2014

October 14, 2014 6:00 am ET

Taiwan's plastics and rubber machinery industry, one of the world's largest exporters of plastics equipment, is projecting a modest recovery in the se...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events