Thermoforming Systems wins orders for new trim press

By Roger Renstrom
Correspondent

Published: May 17, 2012 6:00 am ET

James Naughton, president of Thermoforming Systems LLC (Plastics News photo by Roger Renstrom)

Related to this story

Topics Thermoforming, Machinery, Product News, NPE 2012

ORLANDO, FLA. (May 17, 1:35 p.m. ET) — Equipment manufacturer Thermoforming Systems LLC of Union Gap, Wash., introduced a model of its trim press with linear rail 5.0 heavy-duty guidance.

“We reorganized the platen to have linear rail guiding,” said James Naughton, TSL president since 2006 and previously vice president of operations. “We are up to a 16-inch stroke” from the 12-inch stroke in previous trim presses. 

Technology improvements generated seven orders — five domestic and two in Mexico — in the weeks prior to NPE2012. The total value of about $6 million covers orders ranging from one or more stand-alone or thermoformer-integrated trim presses and some thermoformers. Standard lead time for a thermoformer is 22 weeks.

“We applied for two patents in early 2012 for protection of the difference between mechanically servo driven and cam driven,” he said.

TSL has modified the design for tool changes and made the equipment more able to work with automation systems.

At NPE2012, TSL showed its trim-in-place FT4K thermoforming machine incorporating the firm’s tilt technology, four Sentra-brand temperature controllers from Advantage Engineering Inc. of Greenwood, Ind., and servo-motor technology from Yaskawa Electric Corp. of Kitakyushu, Japan. TSL introduced the FT4K in late 2010.

The FT4K in the exhibit went back to Washington State for tests and completion prior to an anticipated June delivery to food-packaging producer Tech II Inc. of Springfield, Ohio. Tech II began operating its first FT4K from TSL in May 2011.

Naughton said TSL is the only U.S. manufacturer of equipment with tilt technology, a synchronized dual servo-toggle-driven design.

The designer-builder of continuous thermoforming equipment employs 75 and occupies 50,000 square feet.

TSL was established in June 2002 from the bank-owned assets of the former International Thermoforming Systems.

“Everyone at TSL and our Sunwell Global Ltd. partners in the booth were happy with the show,” Naughton reported.


Comments

Thermoforming Systems wins orders for new trim press

By Roger Renstrom
Correspondent

Published: May 17, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

VisiPak adds to customer mix, product offerings with Tulox acquisition

March 5, 2015 2:19 pm ET

VisiPak has acquired Tulox Plastics Corp., a maker of clear plastic packaging.    More

Image

Best Places To Work: No. 7, CMD Corp.

March 4, 2015 12:27 pm ET

There's a lot of innovating going on at the No. 7 company on Plastics News' Best Places to Work ranking.    More

Image

Shepherd named Thermoformer of the Year

March 4, 2015 11:32 am ET

Barry Shepherd, of Shepherd Thermoforming and Packaging Inc., is the newest Thermoformer of the Year.    More

Image

West Coast ports dispute impacts machinery imports

February 27, 2015 5:00 pm ET

Asian machinery companies got caught in the West Coast ports labor dispute — causing some headaches to get equipment ready for NPE 2015.    More

Image

Wittmann, Illig among machinery firms boosting investments in India

February 27, 2015 1:34 pm ET

GANDHINAGAR, INDIA — Expected growth in the Indian plastics market is leading several global machinery firms to make investments there, includin...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events