North American prices fall for PE, PP, PVC and PET

By Frank Esposito
Senior Staff Reporter

Published: June 28, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers

AKRON, OHIO (June 28, 2:50 p.m. ET) — The slippery slide of the commodity world sent average North American prices for several resins down once again in June.

Since June 1, average prices for all grades of polyethylene in the region have fallen 7 cents per pound, while average polypropylene prices have plummeted 15 cents per pound. In that same time frame, average prices for suspension PVC and PET bottle resin each are down 5 cents per pound, according to buyers and market sources contacted by Plastics News.

Prices for each of those materials had slipped in May as well. Early-year price gains now have been erased for all of them.

Sources and market watchers cited declining feedstock costs and lethargic consumer demand as reasons for the second straight month of price declines.

The PE move was the second 7-cent drop in as many months. “Ethane and ethylene [feedstocks] are falling, but they may have hit bottom,” said Mike Burns, a PE market analyst With Resin Technology Inc. in Fort Worth, Texas. “If prices stay the same in July, they could be flat for August as well.”

U.S./Canadian demand has not done much to support market pricing. Through April, regional high density PE sales were down almost four percent, with low density PE sales down about 5 percent and linear low density PE sales off just over 6 percent, according to the American Chemistry Council in Washington.

PE buyers “now are just buying as needed,” Burns added. “They’ve got no incentive to buy more, because prices are decreasing.”

Burns also said that he doubted that lower prices could do much to help North American PE makers to sell their materials elsewhere, since PE from other global regions now are competing for that same business as well. Through April, U.S./Canadian PE exports were down almost 24 percent, with LLDPE exports down 19 percent and LDPE exports slipping more than 5 percent.

The latest PP drop is another in a series of dizzying moves to befall that market in the last two years. Regional prices had climbed 22 cents per pound in the first four months of 2012, but now have zoomed down 25 cents since May.

PP pricing “is a case of live by the sword, die by the sword,” said Phil Karig, owner of the Mathelin Bay Associates LLC consulting firm in St. Louis. “Or, more specifically, polypropylene prices following oil prices up, then following them down and then starting the cycle all over again.”

Crude oil prices were near $78.50 in early trading June 28. Prices for that key feedstock have slipped almost 14 percent in the last month – and are way off of their $100-plus highs reached earlier this year.

But Karig added that PP buyers “shouldn't get too comfortable with the latest [price] drop…because the pricing roller coaster will start climbing again as soon as oil prices blip up again.”

Through April, North American PP demand basically was flat, according to ACC, with a 2 percent domestic sales gain being wiped out by a plunge of almost 32 percent in export sales.

PVC prices fell 5 cents in June after slipping down 2 in May. U.S./Canadian sales were surprisingly strong – up 4 percent through April – in spite of the sales drop. Domestic PVC sales were up 9 percent in that period, indicating that the region’s construction market – PVC’s main end market – may be recovering.

One PVC market watcher said that the big unknown for the market moving forward is whether buyers in its dominant pipe end market are holding resin orders as they wait for prices to come down further, or if they’ve already completed some of their usual summer work because of mild winter weather seen in much of the U.S.

In PET, prices now have slid for three consecutive months, although the 5-cent June drop is larger than the combined 4-cent drop of April and May. Lackluster demand for carbonated soft drinks – PET’s biggest end market – was cited as a reason for the decline, as more consumers move toward healthier options such as bottled water, sports drinks or juices.

Contract prices for paraxylene feedstock fell in June, and prices for ethylene glycol feedstock were expected to fall as well, one industry contact said. “Demand [for PET] is still very soft,” he added. “A lot depends on crude oil at this point.”

Through June, regional PE prices now are down an average of 9 percent, according to the Plastics News resin pricing chart. In that same period, PET prices are down 5 percent and prices of PP and PVC each are down 3 percent.


Comments

North American prices fall for PE, PP, PVC and PET

By Frank Esposito
Senior Staff Reporter

Published: June 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Citadel opens second compounding facility in China, near Shanghai

January 27, 2015 3:22 pm ET

Citadel Plastics Inc., the American manufacturer of thermoplastic and engineered composite compounds, has opened its second facility in China,...    More

Image

Sales, profit fall at DuPont

January 27, 2015 3:13 pm ET

Materials giant DuPont Co. will use almost all of the proceeds from an upcoming spinoff — one that includes its fluoropolymer and titanium...    More

Image

A. Schulman, Citadel continue buying blitz

January 27, 2015 11:32 am ET

A. Schulman Inc. and Citadel Plastics Inc. — two deal-happy materials firms — were at it again in the second half of 2014.    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Image

Materials market sees more deals

January 27, 2015 11:26 am ET

Plastics materials deals showed modest growth in 2014, increasing 6 percent vs. their 2013 total.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events