Some imported packaging found to contain heavy metals

Published: July 6, 2012 6:00 am ET

Related to this story

Topics Public Policy, Sustainability, Packaging, Film & Sheet, Thermoforming

BRATTLEBORO, VT. (July 6, 2:25 p.m. ET) — Traces of heavy metals have been found in imported flexible PVC packaging for products sold at discount stores, according to a report from Toxics in Packaging Clearinghouse.

According to a June 28 report, 39 percent of the packages screened by TPCH showed the presence of cadmium or lead.

Nineteen states prohibit the intentional use of heavy metals like cadmium, lead, mercury, and hexavalent chromium in packaging and packaging components, and limit incidental use to less than 100 parts per million.

Heavy metals pose an environmental concern, said Patricia Dillon, program manager for TPCH. When waste is incinerated, the metals aren’t destroyed and instead show up in the ash or in the atmosphere. When waste is recycled, those metals end up back in the packaging stream, she said.

Brattleboro, Vt.-based TPCH works with states to ensure packaging is compliant. In the past, the group has conducted tests on a variety of packaging materials — plastics, glass, steel, aluminum and paper – but this time focused solely on flexible PVC packaging, an area shown to be problematic, Dillon said.

The group also focused on discount or “dollar” stores, because they offer a ready supply of inexpensive, imported products, another common source of non-compliant packaging, she said.

TPCH purchased products at six discount or dollar chain stores and from “dollar bins” at two well-known retail chains. All eight of the retailers sold non-compliant products.

The group would not release the names of the retailers because they have taken action to remove the products and correct the issue, Dillon said, adding that the names would become public if retailers continued to violate the restrictions.

The group tested 61 packages from a variety of products using an X-ray fluorescence (XRF) scanner. Of those, 24 of the packages contained cadmium. One package, for a cat toy imported from China, also contained lead.

Non-compliant packages came from a variety of categories — children’s products, pet supplies, personal care, household items, home furnishings, hardware and apparel — and, with one exception where a product’s origins could not be determined, were imported from China, according to the report.

“It’s not about PVC, it’s about making PVC the wrong way,” said Allen Blakey, spokesman for the Vinyl Institute in Alexandria, Va.

“[Companies] need to show more responsibility for the formulation in the manufacturing and the quality control of their product,” he said in a phone interview.

Heavy metals — cadmium and lead in particular — can be used as stabilizers in PVC or added to inks, Blakely said. The metals are inexpensive and perform well, so at one time were widely used. When concerns were raised about heavy metals, most companies replaced them with other materials, he said, adding that he didn’t know of any major vinyl applications that still used cadmium.

Those that do need to start following the law, he said, and companies that work with imported materials need to be diligent about ensuring they’re compliant.

“The responsibility ought to be with everybody in the supply chain. Everyone buying, transporting and retailing these products,” he said. “You have to ensure that you’re meeting the requirements of the law.”

States used the results of the report to notify retailers, manufacturers and distributors of the non-compliant products. Retailers responded and took action by pulling the products off shelves, returning the products to the manufacturer, implementing new quality-control procedures or purchasing XRF scanners, the report said.

Though non-compliant packages continue to appear, the number is shrinking. In a 2007 report, 61 percent of PVC packages failed screening tests and 52 percent failed in 2009.

Screening for metals has become easier in recent years with the development of handheld XRF scanners, and retailers and major companies have become more diligent about ensuring packages are compliant, Dillon said.

“Since the TPCH has been screening, we think we’re seeing a good improvement in packaging. … We think we’re seeing progress,” she said.


Comments

Some imported packaging found to contain heavy metals

Published: July 6, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Chicago City Council committee approves plastic bag ban

April 24, 2014 7:11 pm ET

Chicago is poised to become the next major U.S. city to enact a ban on single-use plastic bags after a City Council committee vote on April 24.    More

Image

Plastics News Now: Simpsons go Lego, Pharrell Williams gets into recycled plastic

April 24, 2014 8:45 am ET

Lego has teamed up with "The Simpsons" for a special episode, we see the trends at the International Home + Housewares Show and musician Pharrell...    More

Bemis Co. reports flat quarterly sales and profit

April 24, 2014 3:22 pm ET

Bemis Co. Inc. feels no pressure to fill its vacant chief financial officer’s position, a slot that has now been vacant for months.    More

Interactive map aids polypropylene recycling efforts

April 24, 2014 1:34 pm ET

Folks interested in recycling polypropylene products now have a new tool at their disposal.    More

Biopolymer firms report success with PHA pilot production

April 24, 2014 1:30 pm ET

Biopolymer developer Meridian Inc. and Tate & Lyle plc have reported successful pilot production of Meridian's process to make polyhydroxyalkanoate, a...    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events