Republic Plastics doubling size of Knoxville thermoforming plant

Published: July 9, 2012 6:00 am ET

Related to this story

Topics Packaging, Thermoforming

MCQUEENEY, TEXAS (July 9, 11:05 a.m. ET) — Republic Plastics plans to double the size of one of its Knoxville plants and add 200 hundred jobs at the location.

The McQueeney, Texas-based thermoformer completed an expansion at the plant last month and will complete another expansion next year. Altogether, the 98,000-square-foot facility will double in size, said CEO and President Gino Inman.

Republic also operates another 230,000 square-foot plant in Knoxville. In 2011, the company opened a second Knoxville facility, located in the same industrial park, because the first plant was landlocked, Inman said. The second plant originally served as a warehouse with 30 to 50 employees, but an expansion in 2011 allowed the facility to start manufacturing.

Republic currently employs 300 full-time and seasonal workers in Knoxville, but when the dust settles, could employ up to 500, he said.

Republic thermoforms polystyrene foam containers and tableware. The company specializes in store brand or private label consumer products, like plates and bowls, for retailers like Wal-Mart, Kroger and Winn-Dixie.

Private label products have taken off in recent years, largely due to the economic recession, Inman said.

“The consumer is looking for value, and there’s no difference in specification between the branded and the private label or store brands,” he said, adding that consumers typically save 15-20 percent and will continue to buy store brands if products are high-quality.

The newest Knoxville plant will serve customers on the Eastern Seaboard. The increased capacity will also help Republic continue to expand into the warehouse club store market, he said.

Republic also operates plants in McQueeney, Texas and Eloy, Ariz. Those plants have also undergone multiple expansions in the last few years, he said.

Inman helped found Republic Plastics in 1999. He would not disclose specific financial information, but said the company’s sales were up 35 percent last year.

“I’ve worked for the billion dollar companies; they trained me well, and now I’m competing with them,” he said.


Comments

Republic Plastics doubling size of Knoxville thermoforming plant

Published: July 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PET film maker Evertis expanding production in Mexico, Brazil, Portugal

November 20, 2014 2:52 pm ET

Evertis, a PET film maker, is expanding production at plants in Mexico, Brazil and Portugal, the company said.    More

Image

Coveris changes culture, eyes IPO

November 20, 2014 1:40 pm ET

CEO Gary Masse has a simple message, and some new math, for everyone at Coveris Holdings Corp. Get on board or get out of the way.    More

Russian industrial film maker converting to food packaging film

November 19, 2014 9:46 am ET

Tasma, an 80-year-old Russian producer of technical industrial films which supported the USSR war effort during World War II, has assumed a new role...    More

Image

Film manufacturers pushing, again, for non-resin price increases

November 17, 2014 2:57 pm ET

UPDATED — For the third time this year, major polyethylene film makers are seeking non-resin price increases for their products.For the third...    More

Image

Silgan Plastics building container plant in Pennsylvania

November 17, 2014 4:47 pm ET

Silgan Plastics LLC will build a 135,000-square-foot site in Erie County, Pa. that will create 30 new jobs during the next three years, according to t...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events