Ethox sues Coke over barrier PET

Published: July 18, 2012 6:00 am ET

Related to this story

Topics Packaging, Materials, Blow Molding, Design

GREENVILLE, S.C. (July 18, 7:30 a.m. ET) — Ethox Chemicals LLC is suing Coca-Cola Co. for patent infringement, claiming that the beverage giant stole a molecule, PEM, designed to enhance the barrier properties of PET.

Ethox, a division of chemical manufacturer Piedmont Chemicals Inc., says that its molecule bis(2-phenoxyethyl)terephthalate, or PEM, can be used as a PET additive to reduce permeation, extend shelf-life and allow beer to be sold in plastic bottles.

In a suit filed June 19 with the U.S. District Court in Greenville, S.C., Ethox argues that Coke filed patents for two containers containing the additive, despite knowing that it had no rights to the molecule.

In its patent application, Coke neglected to name the additive’s inventor, Ethox senior research chemist James Tanner, with the “intent of misappropriating the PEM molecule for its own use,” the suit alleges.

According to the filing, Coke approached Ethox and research firm PolyTech Resources LLC in early 2009 about developing and assessing a genus of molecules designed to enhance the barrier properties of plastic bottles.

In August 2009, Tanner determined that commercially synthesizing Coke’s patented additive, bis(2-benzoyloxy)ethyl terephthalate or BPO1, was not economically feasible. In an email to T. Edwin Freeman, a member of Coke’s global innovation and research group, Tanner proposed the recently-developed PEM as an alternative.

Freeman expressed interest in the molecule and asked Ethox to send Coke a high-purity sample for testing. From September to November 2009, the parties corresponded about the material — at Freeman’s request, Ethox sent Coke two samples of PEM and offered estimated per-pound pricing.

“Upon information and belief, after Coca-Cola became aware of the unique and innovative qualities of PEM, Coca-Cola, by its representatives, decided to steal PEM for its own,” Ethox’s attorney wrote in the filing.

On Dec. 2, 2009, Coke filed two patents for polyester containers with enhanced gas-barrier properties. Both patents identified and claimed PEM, according to the suit.

In the suit, Ethox argues that Coke committed fraud and misappropriated trade secrets, among other charges.

The suit also claims that Coke violated the South Carolina Unfair Trade Practices Act.

The two parties attempted to settle the dispute out of court, but were unable to reach an agreement, said Philip Hirschhorn, an attorney for Ethox.

“We’re very surprised that a company like Coca-Cola would engage in the theft of a molecule of one of the companies that it’s working with,” he said. “I’d like to hope it’s an accident, but because of the circumstances it appears it’s not. It appears there’s intent behind it and that’s why a lawsuit had to be brought.”

Greenville-based Ethox is asking the court to require that Coke amend the patent to list Tanner as a co-inventor. The firm also is asking Coke to pay actual and exemplary damages, including the disgorgement of profits made from using PEM, and Ethox is seeking an injunction barring Coke from making, using, selling or importing PEM and other Ethox trade secrets.

Ethox has requested a jury trial.

On July 13, Coke was granted a 31-day extension. The Atlanta-based company has until Aug. 13 to respond to the suit.


Comments

Ethox sues Coke over barrier PET

Published: July 18, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Updating a travel icon for the professional millennial

August 29, 2014 11:44 am ET

As part of a drive to expand its customer base to include more millennials, Airstream Inc. turned to the Columbus College of Art & Design's...    More

Image

Tighter resin prices leading to price hike for PE film

August 29, 2014 11:13 am ET

One of North America's largest film makers is pushing through a polyethylene price increase due, in part, to the tight resin market.    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

Sidel opens training center in Mexico

August 29, 2014 9:00 am ET

Swiss machinery company Sidel Group has opened a new training center in Guadalajara, Mexico, featuring a virtual factory environment, augmented realit...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events