Recycling loan aids expansion at Canyon Plastics

By Roger Renstrom
Correspondent

Published: July 20, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability, Materials, Injection Molding, Blow Molding, Recycling, Suppliers

VALENCIA, CALIF. (July 20, 1:25 p.m. ET) — Canyon Plastics will use a $1.2 million loan from CalRecycle to help it relocate to a larger plant in Valencia, Calif., and finance equipment purchases, according to Kirit Gijera, Canyon’s president and CEO.

Under the loan’s terms, the custom injection and blow molder has agreed to divert 582 tons of plastics annually from California landfills, in addition to the 506 tons it already diverts, according to the CalRecycle application. It also has committed to creating 36-42 more jobs, most of them within the first year. Currently, Canyon employs 86.

CalRecycle — the state of California’s Resources, Recycling and Recovery Department — announced that it had approved the 15-year recycling-market development-zone loan at a July 19 meeting in Sacramento.

Commercial real estate brokerage NAI Capital of Santa Clarita, Calif., said Canyon purchased a 110,950-square-foot industrial building on 5.3 acres in December 2010, in a transaction valued at $7.75 million. The new site is just over a mile from Canyon’s longtime operation in Valencia, comprising a 30,000-square-feet building, which the firm owns, and leased warehouse space totaling 75,000 square feet. All of the facilities are in an unincorporated portion of Valencia in Los Angeles County.

CalRecycle expects to fund the loan by the end of July.

Canyon has relocated its warehousing and has begun moving equipment to the new plant, with plans to start production in September. The company said it may retain ownership of its former plant.

Canyon operates eight injection molding machines of 55-400 tons and 14 blow molding machines with the largest shot size capacity being 5 pounds. No decisions have been made yet regarding equipment purchases.

Gijera declined to disclose sales figures.

Canyon provides concept-to-completion services ranging from design, prototyping, mold making and production through distribution for the nutritional, nutraceutical, aerospace, medical and agricultural industries. Its auxiliary services include hot stamping, sonic welding, screen printing, pad printing, assembly and customized packaging.

Among its operations, the company can capture a job’s remaining hot-runner resin and use it for the same customer to meet a specific demand for post-consumer recycled content in a product, Gijera said. “We use our own material for our own customers,” he said.

The company uses virgin resin to mold critical-care parts.

A 1989 state law established the recycle-market development-zone program through which CalRecycle loans funds to eligible businesses and non-profits in designated zones. CalRecycle, received Canyon’s application last August. In the request, Canyon said it would use the loan to finance equipment purchases and capital improvements, facilitate its relocation and provide working capital.

Gijera’s Unistar Enterprises Inc. acquired Canyon Plastics in November 1998.


Comments

Recycling loan aids expansion at Canyon Plastics

By Roger Renstrom
Correspondent

Published: July 20, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Molder goes to auction block

October 17, 2014 12:17 pm ET

An Illinois custom injection molding operation will be auctioned off after its owner decided to close the business.    More

Image

Humanoid robot provides inspection service with a smile

October 17, 2014 6:00 am ET

Everyone knows robots can improve production and quality. But no one says they can't show a little personality while they're working.    More

Image

Hasco gets into augmented reality

October 17, 2014 6:00 am ET

Mold makers may be used to seeing cores and pins on the exhibition stand of a supplier — but not augmented reality that looks like it comes...    More

Image

Plastikon expanding in Kentucky

October 17, 2014 11:24 am ET

Automotive supplier Plastikon Industries Inc. plans to more than double the size of its production facility in Leitchfield, Ky.    More

Image

Corbion Purac collaboration taking bioplastics into even more uses

October 17, 2014 6:00 am ET

Corbion Purac NV's collaboration with Taiwan-headquartered compounder Supla Co. Ltd. and Taiwan electronics producer Kuender & Co. is paying dividends...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events