Bayer's MacCleary predicts sales growth this year

By Frank Esposito
Senior Staff Reporter

Published: July 26, 2012 6:00 am ET

Related to this story

Topics Medical, Construction, Sustainability, Materials, Suppliers

PITTSBURGH (July 26, 1:55 p.m. ET) — In an increasingly common 21st century move, Jerry MacCleary has taken on a new job while keeping his old job.

MacCleary became president of the NAFTA region for Pittsburgh-based Bayer MaterialScience LLC on June 1. In that role, he’s replacing Greg Babe, who retired after a 32-year career with the firm.

At the same time, MacCleary retained leadership of polyurethanes marketing and business development for BMS in the NAFTA region. He’s held that responsibility since 2004.

MacCleary has more than 30 years of experience overall with BMS, which is a unit of global chemicals giant Bayer AG of Leverkusen, Germany. He’s now heading a regional business that had sales of almost $3 billion last year, up almost 10 percent from 2010.

MacCleary recently fielded some questions about the business — and what the future might hold — at his Pittsburgh office.

“We’re cautiously optimistic on the economy,” MacCleary said. “We think our sales volume in North America could end up being up 6-8 percent this year.

“Our strength has been automotive,” he added. “We didn’t expect it to recover this much for a while. Lightweighting [of auto parts] has been a big plus for polycarbonate.”

In the building and construction market, MacCleary said PU is being used as a substitute for other products. PU foam, for example, is replacing products such as fiberglass. Energy-efficient, PU-based boards also are being used in commercial roofing and in re-roofing work.

An improved U.S. housing market would be a big boost for PU sales. The market built about 610,000 units last year and through March was on pace for 650,000 in 2012. But that’s a far cry from pre-recession totals that were as high as 1.4 million as recently as 2007.

“We’re seeing some change there,” MacCleary said of the housing market. “I think the number of [annual] starts can get back to 1 million.”

And like many Pittsburgh-area businessmen, MacCleary is enthusiastic about prospects for shale gas. Shell Oil has plans to develop a major ethane cracker in Monaca, Pa., about 35 miles from Pittsburgh, that would produce numerous plastics feedstocks.

“It’s a game-changer for the U.S. chemical industry,” MacCleary said of the shale boom. “We had been seeing more competition for the same resources, and the U.S. wasn’t even on the radar screen for growth. Now, we’re going to be the low-cost manufacturer.”

“This is very positive. It’s going to make us more competitive and lead to more manufacturing.”

Sustainability also is on the agenda at BMS, with MacCleary pointing out that PU products like walls and roofing, and PC items like LED lighting, can be energy-savers as well.

“Everyone has major programs to reduce their carbon footprint,” he said. “We’ll continue to work with the American Chemistry Council on Responsible Care and other programs.”

The medical sector holds promise for BMS, according to MacCleary, not only in the form of PC being used in medical devices, but in PU being used in new medical buildings and urgent-care centers that are being built.

On the capital improvement front, BMS late this year will be closing its operations in Baytown, Texas, for a $120 million revamping that will improve the site’s safety and reliability while increasing capacity through streamlining, MacCleary said. The site’s production of PC and PU feedstocks methylene diphenyl diisocyanate and toluene diisocyanate is expected to begin again early next year.

In North America, BMS also is facing a challenge in the personnel area, as about 15 percent of the firm’s non-manufacturing employees are scheduled to retire in the next 18 months.

“We’re definitely going to be hiring,” MacCleary said. “It’s going to be a big challenge to fill those positions.”


Comments

Bayer's MacCleary predicts sales growth this year

By Frank Esposito
Senior Staff Reporter

Published: July 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Design Stories: Young designers showing the way in adaptive design

August 27, 2014 12:12 pm ET

Amanda Bolton, then 19, decided to change her major at the University of Cincinnati from fine arts to industrial design, creating products for people ...    More

Image

Sony entering recycled PC market

August 27, 2014 11:08 am ET

Consumer electronics giant Sony Corp. is getting into a sideline of selling recycled resins.    More

Image

PolyOne expands special effects offerings for PET

August 27, 2014 11:03 am ET

PolyOne Corp. has added a new line of shimmer and frost-effect colorants to its InVisio line of color services and solutions.    More

Image

Scott & Fyfe launches fire-resistant mat for rail cars

August 27, 2014 10:56 am ET

Scott & Fyfe Ltd. has added an exceptionally fire-resistant chopped glass mat to its Polymat reinforcement product line.    More

Beckhoff Automation increases sales, expands headquarters plant

August 27, 2014 10:53 am ET

Beckhoff Automation GmbH of Verl, Germany, generated global sales of 435 million euros ($575 million) in 2013, an increase of 7 percent.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events