Faurecia launches 2nd Fraser site

By Rhoda Miel
News Editor

Published: August 2, 2012 6:00 am ET

A Faurecia SA employee attends to welding and assembly work at the Fraser, Mich., site. (Faurecia SA photo)

Related to this story

Topics Automotive Injection Molding Thermoforming Molds/Tooling
Companies & Associations

FRASER, MICH. (Aug. 2, 4:30 p.m. ET) — Auto supplier Faurecia SA has launched production at its second plant in Fraser, and already has space set aside for future expansion.

Faurecia, with North American operations based in Auburn Hills, Mich., began renovating an empty 160,000-square-foot building in January and is now producing key interior parts for General Motors Co.’s Cadillac ATS and Ford Motor Co.’s Focus.

It has one injection molding machine in use now and space for up to 14, said plant manager Damien Duclair during an interview at the plant’s Aug. 2 opening ceremony.

An overhead crane system covers the entire molding area, which is a key to the company’s rapid tooling changeover system, Single Minute Exchange of Dies, or SMED, practiced in Fraser and elsewhere globally. The name points to the company’s target, not its current tooling change pace, Duclair added.

In addition to injection molding, the plant thermoforms thermoplastic olefin skins used on center consoles and doors and has in-house welding and assembly. It makes 10 different components for the Cadillac interiors, among them the glove box, knee bolster, defroster grille and front and rear door panels.

The door panels use a natural fiber thermoplastic composite, which helps to reduce weight and resin content, Faurecia North America President Mike Heneka noted.

It takes in parts from its sister plant on nearby 14 Mile Road in Fraser, another Faurecia site in Mexico and coordinates final assembly on some parts with sequencing specialists. The Masonic plant is working with recyclers who can separate multilayer scrap and allow the site to reuse the material, Duclair said.

Faurecia entered the North American market less than 10 years ago and has been growing steadily since then. It is now the eighth largest auto supplier in North America, Heneka said. In addition to its interiors business, the company — with global headquarters in Nanterre, France — supplies seats, exterior systems including front-end modules and exhaust systems.

Michigan Gov. Rick Snyder joined a contingent of city, county and state officials to mark the opening ceremony, with Snyder noting Faurecia’s growing employment base in the state.


Comments

Faurecia launches 2nd Fraser site

By Rhoda Miel
News Editor

Published: August 2, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Jaguar Land Rover to begin using MuCell across its product line

April 27, 2015 9:47 am ET

Another automaker has announced plans to use Trexel Inc.'s MuCell molding technology in future production.    More

Image

Haitian builds system for Renault's new China auto assembly plant

April 24, 2015 11:10 am ET

A late-comer to the world's largest auto market, French carmaker Renault SA is currently building its first factory in China.    More

Image

Eriks NV buys two US polymer companies

April 24, 2015 10:38 am ET

Dutch company Eriks NV is expanding its reach in the North American plastics sector with two acquisitions: Dallas-based Seals and Packings Inc. and...    More

Image

Jeco adds Ferry rotational molder to handle increase in business

April 23, 2015 12:27 pm ET

Jeco Plastics Products LLC is ramping up for more work, adding a new Ferry 2600 rotational molder that will provide more capabilities.    More

Image

Engel, VW working on joint research into high volume composites in auto

April 23, 2015 9:40 am ET

Engel, the Austria-based manufacturer of injection molding machines, is building one of its largest machines for a research center looking into integr...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events