Sabic: Plastic body panels are coming back

Lindsay Chappell

Published: August 9, 2012 6:00 am ET

Related to this story

Topics Automotive, Sustainability, Materials, Design

TRAVERSE CITY, MICH. (Aug. 9, 1:05 p.m. ET) — The future looks brighter for plastic exterior vehicle parts as automakers intensify their search for weight-saving ideas.

After suffering a blow nearly a decade ago, when General Motors abandoned its pioneering use of polymer body panels on its Saturn lineup, plastics are poised for a comeback, says Venkatakrishnan Umamaheswaran global automotive marketing director for Sabic Innovative Plastics.

The two main reasons:

1. Weight reduction is a more urgent priority for automakers in 2012, and plastics offer as much as a 50 percent weight savings over comparable parts made of steel.

2. Suppliers have made manufacturing with plastic parts easier and less expensive.

Umamaheswaran says Sabic is getting orders to supply new programs. Most of them are in Europe and Asia, he acknowledges, including fenders and other exterior pieces on recent vehicles from Renault, Peugeot, Citroen, Mitsubishi and Chery.

And makers of a number of U.S.-market vehicles also are considering Sabic plastic exterior parts for upcoming models, he says.

“American car manufacturers went through that phase one of plastic body panels, and we believe that a phase two is imminent and coming,” Umamaheswaran says.

The 2002 Saturn Vue had plastic body panels, but General Motors was dissatisfied with the material’s exterior appearance. The panels needed room to expand when hot, resulting in wider than normal gaps in the body.

GM, which struggled a decade ago to rekindle sales of its plastic-clad Saturn vehicles, concluded that plastic didn’t deliver the quality it wanted for exterior appearances. The panels needed room to expand when hot, resulting in wider than normal gaps in the body.

“The industry was still in its infancy when GM was making plastic body panels,” Umamaheswaran says. “We’ve made some big strides in the chemistry of plastics in the past decade, and the industry is starting to reconsider us.”

Interior and exterior plastics and composites combined account for less than one-tenth of the average light vehicle’s body weight, according to the American Chemistry Council, an association that represents the key automotive plastics suppliers.

One key innovation allows for easier painting of plastic parts today. Electrostatic painting, which directs paint with an electrical charge, didn’t work on plastic parts, and factories needed two separate paint lines to handle the material.

Plastic suppliers have now enhanced the raw material by mixing in a conductive filler that makes the plastic behave like a steel part for painting.

“We’ve made the material much friendlier for the production process, and the industry is responding to this around the world,” he says. “There are some significant projects coming up.”


Comments

Sabic: Plastic body panels are coming back

Lindsay Chappell

Published: August 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Toyoda Gosei's growth strategy places a big focus on North America

October 23, 2014 1:21 pm ET

Sometimes, knowing your weaknesses is just as important as knowing your strengths. And if 2014 is any indication, automotive supplier Toyoda Gosei Co....    More

Image

FTC warns bag makers to take care before making biodegradeability claims

October 23, 2014 12:30 pm ET

Makers of oxodegradable or oxo-biodegradable plastic bags should consider themselves on notice, according to the U.S. Federal Trade Commission.    More

Image

Packaging specialist Amcor hits sustainability goals ahead of schedule

October 23, 2014 11:15 am ET

Global packaging company Amcor Ltd. has achieved its waste reduction goals two years ahead of schedule, according to the company's new sustainability ...    More

Image

Total picks new management following CEO's death in crash

October 23, 2014 11:03 am ET

Total SA has picked a new management team to oversee the company in the wake of a plane crash in Moscow that killed its chairman and CEO earlier this ...    More

Image

Report: Private equity companies may seek to buy Bayer MaterialScience

October 23, 2014 10:56 am ET

A number of investment groups are reported to be interested buying Bayer AG's MaterialScience operation, valued at around 10 billion euros ($12.6 bill...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events