Awards honor innovation

By Roger Renstrom
Correspondent

Published: August 14, 2012 6:00 am ET

The sleepToo is designed to accommodate members of a hospitalized patient’s family. (Sauder Manufacturing Co. photo)

Related to this story

Topics Materials, Consumer Products, Medical, Injection Molding, Design

Credits go to the corporation, Nobuyuki Mase and Haruhiko Uneo.

DW Product Development Inc. of Ottawa, Ontario, and Ecologic Brands Inc. of Oakland, Calif., and four designers won for a sustainable package for liquid laundry detergent.

Identified as an Ecologic Brands paper bottle, the package consists of a molded paper shell, a pouch liner of thin low density and high density polyethylene films and a 2-inch-diameter fitment/locking collar of injection molded LDPE. DW said the pouch resin uses up to 75 percent less plastic than is used in rigid containers.

After emptying the bottle, a user can separate the outer shell from the liner. The shell is recyclable as paper or compost, and the liner and collar are recyclable as LDPE through grocery store collection points or for manufacturing of Trex Co. composite decking.

The product entered the commercial market in March 2011, retails for $12.99-$14.99 and has helped green cleaning products firm Seventh Generation Inc. of Burlington, Vt., gain market share. Seventh Generation launched a four-times-concentrated detergent using the Ecologic bottle in the natural grocery channel in March 2011.

Credits go to DW’s Romeo Graham, Rob Watters and Mike Sirois, and Ecologic’s Julie Corbett.

Designers with Teague of Seattle and B/E Aerospace Inc. of Wellington, Fla., won for a line of 10 products with in the Essence Inserts Collection.

Materials include thermoplastics, advanced aerospace plastics, polymer matrix composites, lightweight foams, pure and alloy aluminums, stainless steel and copper. The products can work alone or within an integrated system.

The collection addresses airlines’ need to differentiate services, including those functional items such as a steam oven and an espresso maker in each airplane’s cabin galley. The line’s language is designed to create a sense of harmony and balance within the cabin galley.

Credits go to Teague’s Brian Conner, Tony Bravetti, Sebastian Petry and Adam Kumpf, and the B/E Aerospace design team.

Teague — legally Walter Dorwin Teague Associates Inc. — also won a gold award for its holistic Teagueduino/teagueduino.org open-source interactive hardware platform in the IDEA digital design category.


Comments

Awards honor innovation

By Roger Renstrom
Correspondent

Published: August 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Somple named president of Mack Molding

September 2, 2014 4:30 pm ET

Jeff Somple, president of Mack Molding Inc.'s Northern division, has been promoted to president of all of Mack Molding Inc.    More

Image

GI Plastek to open expanded N.H. plant

September 2, 2014 3:02 pm ET

GI Plastek Wolfeboro LLC, a custom structural foam and injection molder of medium and large parts, is unveiling a 35,000-square-foot expansion this...    More

Image

Startup post-consumer recycling specialty company Zzyzx wins grant

September 2, 2014 1:33 pm ET

An Allentown, Pa., company is receiving a grant of $737,000 to help support its efforts to develop polymers using post-consumer plastics.    More

Image

Minnesota Rubber & Plastics has new leader, new focus

September 2, 2014 12:18 pm ET

With new leadership, Minnesota Rubber & Plastics is setting the foundation for long-term success.    More

Image

A. Schulman buys Australia's Compco, 10th acquisition in 4 years

September 2, 2014 11:13 am ET

Akron, Ohio-based A. Schulman Inc., a supplier of high-performance plastic compounds and resins, said it has acquired a company near Melbourne, Austra...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events