NZ's plastic stadium turns 1

By Kate Tilley
Correspondent

Published: August 15, 2012 6:00 am ET

New Zealand’s transparent polymer-roofed Forsyth Barr Stadium (Chris Sullivan photo)

Related to this story

Topics Materials, Suppliers

DUNEDIN, NEW ZEALAND (Aug. 15, 3:35 p.m. ET) — New Zealand’s transparent polymer-roofed Forsyth Barr Stadium — the world’s only permanently enclosed, natural turf stadium — has celebrated its first birthday.

The stadium’s ethylene tetrafluoroethylene (EFTE) clad roof is light and translucent, allowing maximum sunlight onto the pitch.

The US$162 million stadium is in Dunedin — the second-largest city on New Zealand’s south island. Its rectangular pitch is 433 feet long and 266 feet wide; the internal roof is 121 feet high; and the external roof is 154 feet high. The roof is supported by five arches, each spanning 344 feet.

Construction began in June 2009 and finished Aug. 1, 2011. It held its inaugural rugby football game Aug. 7, 2011, ahead of the 2011 Rugby World Cup, hosted by New Zealand last September.

An international architectural firm, Missouri-based Populous Holdings Inc., designed the stadium with New Zealand-based Jasmax Ltd.

The stadium is the southern hemisphere’s largest ETFE-covered structure, with 220,660 square feet of ETFE cladding.

Before the stadium was built, turf experts, engineers and architects spent two years studying the affect of grass growing under ETFE. An ETFE test rig was built onsite to monitor grass growth.

Populous associate principal Ron Van Sluijs said grass under the ETFE rig was healthier and stronger than grass around it. “We can maintain a constant temperature and grow a stronger grass which won’t become boggy because it will never rain, snow, or hail inside,” he said. “[The] material allows for 90 percent of sunlight to reach the pitch, along with UV light and fresh air.”

Populous associate Jochem Veerman told Plastics News the plastic roof has performed “incredibly well” in its first year.

“It has a reputation as one of the best playing surfaces in New Zealand. The main benefit of having a roof over the grass is the field’s moisture levels can be controlled and are not dependent on the weather,” Veerman said.

ETFE is lighter than glass (just 1 percent of the weight), bears 400 times its own weight, and stretches to three times its length, making it suitable for Dunedin’s windy, snowy conditions. Van Sluijs and Veerman said the material is up to 70 percent cheaper to install than glass, and transmits more light and heat than glass, reducing energy costs by up to 30 percent.

Van Sluijs and Veerman said polytetrafluoroethylene and PVC were often used for roofing, however neither are as clear as ETFE. They also do not allow sufficient light and ultraviolet rays through. Clear hard plastics, like polycarbonate and acrylic, are not suitable because they have non-UV translucent properties.

They said Forsyth Barr Stadium is not the first to incorporate ETFE, but it is the first time ETFE’s UV-transparent properties have been used in a stadium. Auckland’s Eden Park Stadium, Munich’s Allianz Arena and Beijing’s National Aquatics Centre (or Water Cube) also use ETFE.

ETFE-clad, non-sports buildings with vegetation inside include the United Kingdom’s Eden Project (the world’s largest greenhouse) and the Netherlands’ Burgers’ Zoo.

Van Sluijs and Veerman said the Forsyth Barr Stadium is the world’s only permanently covered stadium to house a natural turf playing field, but is not the first. Houston’s Reliant Astrodome was the first, but the grass was replaced with artificial turf within a year after opening.

Some sport venues, like the Netherlands’ GelreDome, Japan’s Sapporo Dome, and Arizona’s University of Phoenix Stadium, have natural grass and fixed roofs. However the pitch is on tracks and slides outside the building to grow.

A spokeswoman for Dunedin Venues Management Ltd., the Forsyth Barr Stadium’s manager, said 350,000 people attended 269 events in the first year. The stadium seats 30,000 people.


Comments

NZ's plastic stadium turns 1

By Kate Tilley
Correspondent

Published: August 15, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Haitian's standardization efforts paying off

August 29, 2014 9:53 am ET

Streamlined design efforts and robust export sales helped propel Ningbo, China-based injection molding machine manufacturer Haitian International...    More

Image

Updating a travel icon for the professional millennial

August 29, 2014 11:44 am ET

As part of a drive to expand its customer base to include more millennials, Airstream Inc. turned to the Columbus College of Art & Design's...    More

Image

American Starlinger-Sahm begins work on new US headquarters

August 29, 2014 10:18 am ET

American Starlinger-Sahm Inc., which sells equipment for woven plastic bag production, PET recycling equipment, sheet extrusion and laminating lines...    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and Ch...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events