AMA Plastics adds more equipment in Riverside, Calif.

By Roger Renstrom
Correspondent

Published: August 29, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

RIVERSIDE, CALIF. (Aug. 29, 10:30 a.m. ET) — AMA Plastics Inc. invested another $1.4 million over 12 months for equipment at its Riverside facility, said CEO Mark Atchison.

Previously, the custom injection molder spent about $3 million for infrastructure, improvements and equipment to transform a 150,000-square-foot high-ceiling distribution-type warehouse into a modern plastics processing plant.

With the latest additions, in August AMA began operating four state-of-the-art 150-ton 4.9-ounce-shot full-servo electric Toyo presses in the 6,000-square-foot clean room. The room, which has capacity for 18 machines, now has 15.

Other new presses include a second two-shot 240-ton multibarrel Arburg and three other Toyo machines of 110, 90 and 55 tons.

Including 75 Toyos, AMA operates 86 injection molding presses ranging from 35-720 tons of clamping force. Maruka USA Inc. of Cerritos, Calif., represents Toyo.

In other new equipment purchases, AMA added a 1,600-cubic-foot-per-minute Novatec NovaWheel central dryer and a 100-horsepower air compressor with variable drive from Quincy Compressor.

A third SmartScope measuring device from a Quality Vision International Inc. unit was added to the quality laboratory, and AMA installed a fourth resin silo. Each silo is equipped with a surge bin.

“We have redundancy for all central systems’ dryer, tower, chiller and material loading” requirements, said AMA President Cheryl Buhler.

AMA installed four post-molding-operation work centers to handle more secondary functions such as cosmetic finishing, ultrasonic welding, pad printing and assembly.

Recently, RJG Inc. granted Ken Pravitz, AMA general manager, his fourth recertification as a Master Molder III. RJG of Traverse City, Mich., initially certified him in 2003. Pravitz has trained five AMA employees for Master Molder I certifications.

With more room in the building, “we are implementing lean practices to help promote structure within the company,” Pravitz said.

AMA projects sales growth of 15 percent for the fiscal year ending Aug. 31. AMA reported sales of about $50 million for the fiscal year ended in August 2011.

During 2011, AMA obtained medical certifications under ISO 13485 and TS 16949 and, after the move, recertification under ISO 9001 and QS 9000.

AMA moved operations about 18 miles from Corona, Calif., in March 2011. A developer built the warehouse in 2008 and sold it to AMA in September 2010. As modified, the facility has 15,000 square feet of office space.

AMA began implementing an employee stock ownership plan in December 2008. At present, the ESOP enabling regular workers to obtain an equity interest involves ownership of one-third of company including the building. AMA employs about 400 persons including those working through an onsite temporary employment agency.


Comments

AMA Plastics adds more equipment in Riverside, Calif.

By Roger Renstrom
Correspondent

Published: August 29, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Large part molder EnviroTech in 'growth mode,' adds space, equipment

November 26, 2014 9:54 am ET

Salt Lake City-based EnviroTech Molded Products Inc. is adding new equipment and expanding its factory as it gains business in some of its...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture facili...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events