AMA Plastics adds more equipment in Riverside, Calif.

By Roger Renstrom
Correspondent

Published: August 29, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

RIVERSIDE, CALIF. (Aug. 29, 10:30 a.m. ET) — AMA Plastics Inc. invested another $1.4 million over 12 months for equipment at its Riverside facility, said CEO Mark Atchison.

Previously, the custom injection molder spent about $3 million for infrastructure, improvements and equipment to transform a 150,000-square-foot high-ceiling distribution-type warehouse into a modern plastics processing plant.

With the latest additions, in August AMA began operating four state-of-the-art 150-ton 4.9-ounce-shot full-servo electric Toyo presses in the 6,000-square-foot clean room. The room, which has capacity for 18 machines, now has 15.

Other new presses include a second two-shot 240-ton multibarrel Arburg and three other Toyo machines of 110, 90 and 55 tons.

Including 75 Toyos, AMA operates 86 injection molding presses ranging from 35-720 tons of clamping force. Maruka USA Inc. of Cerritos, Calif., represents Toyo.

In other new equipment purchases, AMA added a 1,600-cubic-foot-per-minute Novatec NovaWheel central dryer and a 100-horsepower air compressor with variable drive from Quincy Compressor.

A third SmartScope measuring device from a Quality Vision International Inc. unit was added to the quality laboratory, and AMA installed a fourth resin silo. Each silo is equipped with a surge bin.

“We have redundancy for all central systems’ dryer, tower, chiller and material loading” requirements, said AMA President Cheryl Buhler.

AMA installed four post-molding-operation work centers to handle more secondary functions such as cosmetic finishing, ultrasonic welding, pad printing and assembly.

Recently, RJG Inc. granted Ken Pravitz, AMA general manager, his fourth recertification as a Master Molder III. RJG of Traverse City, Mich., initially certified him in 2003. Pravitz has trained five AMA employees for Master Molder I certifications.

With more room in the building, “we are implementing lean practices to help promote structure within the company,” Pravitz said.

AMA projects sales growth of 15 percent for the fiscal year ending Aug. 31. AMA reported sales of about $50 million for the fiscal year ended in August 2011.

During 2011, AMA obtained medical certifications under ISO 13485 and TS 16949 and, after the move, recertification under ISO 9001 and QS 9000.

AMA moved operations about 18 miles from Corona, Calif., in March 2011. A developer built the warehouse in 2008 and sold it to AMA in September 2010. As modified, the facility has 15,000 square feet of office space.

AMA began implementing an employee stock ownership plan in December 2008. At present, the ESOP enabling regular workers to obtain an equity interest involves ownership of one-third of company including the building. AMA employs about 400 persons including those working through an onsite temporary employment agency.


Comments

AMA Plastics adds more equipment in Riverside, Calif.

By Roger Renstrom
Correspondent

Published: August 29, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Jarden hiring for new plastics plant

December 19, 2014 1:45 pm ET

Consumer products conglomerate Jarden Corp. is hiring plastics technicians for a new operation in Erlanger, Ky.    More

Image

The return of HPM's big presses

December 19, 2014 11:47 am ET

HPM is back in big injection molding machines.    More

Image

Indian auto parts maker set to buy assets in Germany, Mexico

December 18, 2014 10:35 am ET

Indian auto parts maker Samvardhana Motherson Gropup is buying the assets of insolvent German plastics car parts producer Scherer & Trier (S&T).    More

Image

Röchling buys two UK firms

December 18, 2014 9:24 am ET

Germany's Röchling Engineering Plastics SE & Co. KG has expanded its presence in the high-performance plastics market by acquiring two British firms...    More

Image

Milacron opening Mexico technical center, considers another in Brazil

December 16, 2014 12:58 pm ET

Milacron LLC plans to officially open a new technical center in Querétaro, 140 miles northwest of Mexico City, early in 2015, and the company is consi...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events