Cook Medical opens $19 million tubing plant in Illinois

Mike Verespej

Published: August 31, 2012 6:00 am ET

Related to this story

Topics Medical, Pipe/Profile/Tubing

CANTON, ILL. (Aug. 31, 2:25 p.m. ET) — Privately owned medical-device manufacturer Cook Medical Inc. has opened a $19 million tubing plant in Canton.

The plant may be the firm’s last new U.S. manufacturing facility —  at least in the near term — since the Bloomington, Ind., company said it will focus on future growth overseas because of the pending 2.3 percent medical-device excise tax.

At the plant’s grand opening Aug. 31, Cook Medical President Kem Hawkins said the 60,000-square-foot plant will employ 60 and manufacture polytetrafluoroethylene tubing, according to a news release. The 49-year-old company uses the tubing in the 16,000 different medical devices that it manufactures.

A sister plant in Canton, which opened two years ago at a cost of $20 million, employs more than 100 skilled workers making angiographic catheters. The two plants, which were built with future expansion in mind, are expected to employ more than 350, eventually.

Canton was the boyhood home of late Cook Group Inc. founder Bill Cook, who wanted to help revive his hometown, which took a severe economic hit nearly 30 years ago when International Harvester closed a plant that employed 3,000.

“We are thrilled to open Cook Polymer Technology Canton, which will provide another 60 jobs to the people of Canton and add a significant economic boost to this small community” of roughly 15,000 people, Hawkins said.

“At Cook, we have always believed in reinvesting revenues earned here and abroad in new manufacturing facilities that create jobs for people,” said Hawkins, who is also president of Cook Group. “Over nearly 50 years, Cook has reinvested more than $1.5 billion in plants across the U.S. and in key facilities overseas that now employ 10,000 people. And we hope circumstances will allow us to continue that tradition.”

However, the company said in late July that it will concentrate future manufacturing plant investments overseas. It already has scrapped plans to open five more medical manufacturing plants in the Midwest over the next five years — similar in size to the plants in Canton — because of the medical-device excise tax, which goes into effect in January.

Cook Medical estimates that tax, part of the 2010 health-care reform plan known as Obamacare, will cost the company between $20 million and $30 million a year. Its late founder Bill Cook estimated the tax would cost the company 1,000 jobs. Cook died April 15, 2011.

Currently, Cook Group has production facilities in Ireland, Denmark and Australia, in addition to its U.S. plants.

At the news conference, Canton Mayor Kevin Meade said he is amazed at the positive economic impact the two Cook plants are having on the community.

“It doesn’t take a huge plant with thousands of jobs to make a real impact. Even a few-hundred good jobs are enough to help a town the size of Canton turn itself around,” he said.

Since Cook opened its first facility in Canton, Meade noted that the local hospital has invested more than $40 million in a new clinic and in upgrades to its existing facilities.

Cook Group also has invested more than $15 million in Canton’s downtown square, building a new 32-room hotel and buying and improving a shopping mall and other properties.

In addition, a number of new retail stores have opened and local businesses have been able to expand, Meade said. And, after years of no new housing permits, he said the city also has experienced a veritable housing boom as a new 42-unit apartment complex is under construction, and permits have been issued for construction of 16 homes.

“The good-paying jobs created with this new investment,” added U.S. Sen. Dick Durbin, D-Ill,, “will have a ripple effect in terms of economic activity far outside the doors of its facilities, as new workers make home improvements they’ve postponed, buy meals and clothing, and contribute to the area’s economy.”

Cook is one of the largest privately held manufacturers of medical devices, with annual sales of more than $1.8 billion. It employs about 4,000 in the Bloomington area.


Comments

Cook Medical opens $19 million tubing plant in Illinois

Mike Verespej

Published: August 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Judge limits scope of jury verdict against JM Eagle

December 19, 2014 2:30 pm ET

A federal judge in Los Angeles said Dec. 18 that last year's jury verdict issued against J-M Manufacturing Co. — now JM Eagle — for...    More

Image

Röchling buys two UK firms

December 18, 2014 9:24 am ET

Germany's Röchling Engineering Plastics SE & Co. KG has expanded its presence in the high-performance plastics market by acquiring two British firms...    More

Image

Baxter expanding Arkansas medical products plant

December 11, 2014 5:50 pm ET

Medical major Baxter International Inc. is expanding its Mountain Home, Ark., medical device plant.    More

Petoskey Plastics using grant to expand recycling operations

December 10, 2014 2:07 pm ET

The company will use the $175,000 grant to help purchase additional sorting equipment at its facility in Indiana.    More

Mold maker considering future Mexican service center

December 10, 2014 12:42 pm ET

Canadian mold maker StackTeck Systems Ltd. of Brampton, Ontario, is optimistic enough about the Mexican market to be thinking about setting up a servi...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events