Cook Medical opens $19 million tubing plant in Illinois

Mike Verespej

Published: August 31, 2012 6:00 am ET

Related to this story

Topics Medical, Pipe/Profile/Tubing

CANTON, ILL. (Aug. 31, 2:25 p.m. ET) — Privately owned medical-device manufacturer Cook Medical Inc. has opened a $19 million tubing plant in Canton.

The plant may be the firm’s last new U.S. manufacturing facility —  at least in the near term — since the Bloomington, Ind., company said it will focus on future growth overseas because of the pending 2.3 percent medical-device excise tax.

At the plant’s grand opening Aug. 31, Cook Medical President Kem Hawkins said the 60,000-square-foot plant will employ 60 and manufacture polytetrafluoroethylene tubing, according to a news release. The 49-year-old company uses the tubing in the 16,000 different medical devices that it manufactures.

A sister plant in Canton, which opened two years ago at a cost of $20 million, employs more than 100 skilled workers making angiographic catheters. The two plants, which were built with future expansion in mind, are expected to employ more than 350, eventually.

Canton was the boyhood home of late Cook Group Inc. founder Bill Cook, who wanted to help revive his hometown, which took a severe economic hit nearly 30 years ago when International Harvester closed a plant that employed 3,000.

“We are thrilled to open Cook Polymer Technology Canton, which will provide another 60 jobs to the people of Canton and add a significant economic boost to this small community” of roughly 15,000 people, Hawkins said.

“At Cook, we have always believed in reinvesting revenues earned here and abroad in new manufacturing facilities that create jobs for people,” said Hawkins, who is also president of Cook Group. “Over nearly 50 years, Cook has reinvested more than $1.5 billion in plants across the U.S. and in key facilities overseas that now employ 10,000 people. And we hope circumstances will allow us to continue that tradition.”

However, the company said in late July that it will concentrate future manufacturing plant investments overseas. It already has scrapped plans to open five more medical manufacturing plants in the Midwest over the next five years — similar in size to the plants in Canton — because of the medical-device excise tax, which goes into effect in January.

Cook Medical estimates that tax, part of the 2010 health-care reform plan known as Obamacare, will cost the company between $20 million and $30 million a year. Its late founder Bill Cook estimated the tax would cost the company 1,000 jobs. Cook died April 15, 2011.

Currently, Cook Group has production facilities in Ireland, Denmark and Australia, in addition to its U.S. plants.

At the news conference, Canton Mayor Kevin Meade said he is amazed at the positive economic impact the two Cook plants are having on the community.

“It doesn’t take a huge plant with thousands of jobs to make a real impact. Even a few-hundred good jobs are enough to help a town the size of Canton turn itself around,” he said.

Since Cook opened its first facility in Canton, Meade noted that the local hospital has invested more than $40 million in a new clinic and in upgrades to its existing facilities.

Cook Group also has invested more than $15 million in Canton’s downtown square, building a new 32-room hotel and buying and improving a shopping mall and other properties.

In addition, a number of new retail stores have opened and local businesses have been able to expand, Meade said. And, after years of no new housing permits, he said the city also has experienced a veritable housing boom as a new 42-unit apartment complex is under construction, and permits have been issued for construction of 16 homes.

“The good-paying jobs created with this new investment,” added U.S. Sen. Dick Durbin, D-Ill,, “will have a ripple effect in terms of economic activity far outside the doors of its facilities, as new workers make home improvements they’ve postponed, buy meals and clothing, and contribute to the area’s economy.”

Cook is one of the largest privately held manufacturers of medical devices, with annual sales of more than $1.8 billion. It employs about 4,000 in the Bloomington area.


Comments

Cook Medical opens $19 million tubing plant in Illinois

Mike Verespej

Published: August 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Snow blamed for roof collapse at Pennsylvania pipe maker

March 3, 2015 4:51 pm ET

Heavy snow is likely to blame for bringing down part of the roof of a Charter Plastics Inc. facility in Titusville, Pa., about 3 p.m. March 3.    More

Image

German molder picks North Carolina for US manufacturing plant

February 26, 2015 4:21 pm ET

UPDATED — German medical goods company Raumedic AG has chosen Mills River, N.C., for its first U.S. manufacturing site and U.S. headquarters.    More

Image

Medical compounder adding two extrusion lines

February 25, 2015 3:49 pm ET

Compounding Solutions LLC plans to add two new co-rotating twin-screw extruders this year to raise its capacity and provide more flexibility.    More

Image

Uponor invests $18 million for more PEX pipe capacity

February 23, 2015 5:09 pm ET

UPDATED — In late spring, Uponor North America will begin construction of an $18 million expansion of its manufacturing operation in Apple...    More

Image

Window maker building 400,000-square-foot fabrication plant

February 19, 2015 4:28 pm ET

MI Windows and Doors LLC (MIWD) is moving production from its extrusion plant in Carrollton, Texas, to a new facility about 15 miles away in Flower Mo...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events