Long Island to house advanced composites technology center

Published: September 5, 2012 6:00 am ET

Related to this story

Topics Automotive, Design

BETHPAGE, N.Y. (Sept. 5, 10 a.m. ET) — The Long Island Forum for Technology plans to open an advanced materials center that will focus on composites.

LIFT has purchased a 25,000 square foot building in Plainview, N.Y., that will house its Advanced Materials and Manufacturing Technology Innovation Center.

LIFT President Frank Otto said the center will “serve as a premier resource for composite prototype production across diverse markets, from aerospace, and defense to energy, infrastructure, and transportation.”

The center is scheduled to open in the second half of 2013. It will include automated fiber placement machines, filament winding system, large and small autoclaves, vacuum assisted resin transfer molding system and a compression molding heated press.

The center also will include a clean room with an automated singly ply cutter, walk-in ovens, a machine shop for post machining and tool design, test and inspection cells, a storage area with walk-in freezers, and a training area with CAD/CAM composite software suites.

The center also will be home to training programs covering composite material handling, design and manufacturing. The center will coordinate Farmingdale State College and Stony Brook State University of New York to offer certificate and degree programs in advanced composite technologies.

“I am confident that AMMTIC, as one of the nation’s first dedicated prototype composite facilities, will further position Long Island at the national level as a major driver of the advanced manufacturing initiative,” Otto said in a news release.

LIFT is a non-profit economic development organization that works with the New York State Foundation for Science, Technology and Innovation and the National Institute of Standards and Technology’s Manufacturing Extension Partnership.


Comments

Long Island to house advanced composites technology center

Published: September 5, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

Inspection system eyes carbon fiber automotive production

November 19, 2014 9:00 am ET

Pixargus GmbH, the company that created GoalControl, a 14-camera inspection system used to detect if a ball crossed the goal line at the World Cup...    More

Image

Electronics, aerospace driving new Aptiv film production for Victrex

November 18, 2014 9:40 am ET

Victrex plc has launched production at its new $25 million manufacturing facility for high performance thermoplastic film Aptiv, with the United...    More

Image

Venture capital firm buys stake in Ximedica

November 17, 2014 3:32 pm ET

International venture capital firm SV Life Sciences has acquired a majority stake in Providence, R.I.-based medical device company Ximedica LLC.    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events