Dickten Masch acquires Nyloncraft

By Rhoda Miel
News Editor

Published: September 7, 2012 6:00 am ET

Related to this story

Topics Automotive, Mergers & Acquisitions, Injection Molding

NASHOTAH, WIS. (Sept. 7, 2:25 p.m. ET) — Dickten Masch Plastics LLC has purchased fellow molder Nyloncraft Inc. and will look to build on both companies’ engineering-plastics experience to replace metal components in the transportation industry.

Nyloncraft, based in Mishawaka, Ind., will retain its name, organization, operations and management team as part of the deal announced Sept. 7. Terms were not disclosed.

At the same time, Nashotah, Wis.-based Dickten Masch can look at opportunities to integrate technologies from both companies within a wider manufacturing footprint in the Midwest and expand offerings in Monterrey, Mexico.

Key elements of the joint operation are still being implemented, said Doreen Lettau, DMP vice president of market and business development, but it is clear there are benefits for both firms by joining forces.

“There is still a lot of stamping and die-casting parts [in automotive] and there is a lot that we can still convert and identify both under the hood and in structural parts,” she said in a telephone interview.

Dickten Masch has manufacturing in Nashotah; Ankeny, Iowa; and Monterrey. The company acquired the Monterrey plant in 2011 from UPG Inc.

Private investment group Patmian LLC bought Dickten Masch in 2010 with plans to build the company through regional expansions.

The injection molder focuses on functional plastics with both thermoset and thermoplastic production and works in a variety of industries including medical, hand tools, electrical and small-engine products. Its automotive products take in a variety of under-the-hood parts such as rocker covers, structural brackets and grilles.

Nyloncraft has production in Mishawaka and Jonesville, Mich., and has insert molding, gas-assist molding and overmolding but has also developed a specialty in injection compression molding — with structural plastics that can replace steel for car door carriers and seat backs.

Nyloncraft’s proprietary vacuum boost systems are used by engine makers to enhance vehicle braking and fuel systems by carefully adding an air boost to the system. The boost systems are important to automakers and commercial truck makers that need to reduce the size of engines without sacrificing performance.

The company has had the boost system in production for some time, but recently expanded the line to further tap into automakers’ requirements, said Nyloncraft President Jim Krzyzewski.

“What we’ve done is to take it to a new level,” he said.

The two companies jointly will have more than 800 employees and generate combined annual sales of about $175 million.

The firms will look at the best way to integrate their technologies within the other’s plants, Lettau said. An early shift is likely to provide manufacturing of Nyloncraft’s products in Mexico to existing Nyloncraft customers in the area, she said, which will allow the group better access to grow in the region.

“The customers, that’s one of the first things they’re jumping on, asking, ‘How soon can you be there?’ ” Krzyzewski said. “Existing product lines will probably stay where they’re at, but for future products, that’s where this cooperation will really be able to show itself.”


Comments

Dickten Masch acquires Nyloncraft

By Rhoda Miel
News Editor

Published: September 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Optical disc molder OEM getting into micromolding with acquisition of CDA

August 29, 2014 11:24 am ET

Optical disc replicator and molder Optical Experts Manufacturing Inc. of Charlotte, N.C., has expanded its core business and entered new high...    More

Image

Baxter investing $300 million to expand dialyzers production in Alabama

August 29, 2014 12:53 pm ET

Baxter International, Inc. is expanding its Opelika, Ala. manufacturing location to boost production of dialyzers, a key component of hemodialysis...    More

Image

Obituary: Jerry Williams, Prism Plastics co-owner

August 29, 2014 8:50 am ET

Williams founded Prism Plastics with Rod Bricker and Gerry Phillips, after the three left Huron Plastics Group in 1999.    More

Polish injection molder Teknorubber up for sale

August 29, 2014 9:14 am ET

Polish plastic parts maker Teknorubber has been put up for sale following its insolvency filing in March 2014. The company is to be auctioned through ...    More

Image

Concours adding equipment as mold making business booms in Mexico

August 28, 2014 2:05 pm ET

Concours Mold Inc. is heading for a 50 percent increase in sales in Mexico this year after a $4 million upgrade of its plant in Huejotzingo, in the st...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events