DaMar Plastics adding equipment in new location

By Roger Renstrom
Correspondent

Published: September 11, 2012 6:00 am ET

Related to this story

Topics Packaging, Blow Molding, Injection Molding

EL CAJON, CALIF. (Sept. 11, 8 a.m. ET) — Custom blow molder and injection molder DaMar Plastics Inc. is investing more than $500,000 for equipment and infrastructure in a new location.

DaMar placed a June order with a domestic supplier for a complete system to fill blow molded bottles of one to three liters with commercial chemicals. The system including conveyor lines should be operational in January, said Sal Acampora, vice president of sales for DaMar.

Currently, DaMar blow molds the containers and, for filling, ships them to a Los Angeles area firm.

For additional capacity, DaMar began operating another dual-head blow molding machine in January. The unit was ordered in 2011 from Changshengda Machinery (Zhejiang) Co. Ltd. and can blow mold up to four containers at a time.

The former Sterling Extruder Corp. manufactured DaMar’s initial dual-head blow molding machine, the first of its kind in the San Diego market, according to Acampora. Rocheleau Tool & Die Co. Inc. made DaMar’s single-head blow molding machine.

For the three blow molding machines, the shot sizes range from 5 grams to 10 pounds and enable DaMar to produce a variety of plastic jars and bottles.

DaMar added the blow molding process in 2006.

In July, DaMar moved about 11 miles to a leased expandable 55,000-square-foot facility in El Cajon from an owned 38,000-square-foot plant in San Diego.

DaMar has cleanroom capability for medical devices.

DaMar has complete tool room capabilities including computer numerical control machining equipment and makes its molds in-house.

David Kabbai, president, said an aggressive development program and DaMar’s blow molding and bottle filling capabilities will result in higher production throughput.

DaMar was established in 1967 and sold to Kabbai and his sister, Michelle Kabbai, in 1986. The El Cajon plant is the family business’s fourth location, each increasingly larger.

Medical, chemical, commercial, industrial and military are DaMar’s principal end markets.

In 2006, DaMar began using a customer-owned station for filling small containers for proprietary applications. “That was the catalysis for us to go to blow molding and bottle fulfillment,” Acampora said.

DaMar operates 12 Toshiba injection molding machines — 10 hydraulics and two electrics — of 85-720 tons.

DaMar employs 35-50 including mold makers in five-day around-the-clock operations and projects 2012 sales of $3.5 million, up from last year’s $3 million. “We want to continue to grow,” he said.

In David Kabbai’s 2005 business decision, DaMar shut down its ATI division, which injection molded proprietary handlebar grips for various kinds of bicycles. Competitors in China undercut that business, Acampora said.


Comments

DaMar Plastics adding equipment in new location

By Roger Renstrom
Correspondent

Published: September 11, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Baxter investing $300 million to expand dialyzers production in Alabama

August 29, 2014 12:53 pm ET

Baxter International, Inc. is expanding its Opelika, Ala. manufacturing location to boost production of dialyzers, a key component of hemodialysis...    More

Image

Obituary: Jerry Williams, Prism Plastics co-owner

August 29, 2014 8:50 am ET

Williams founded Prism Plastics with Rod Bricker and Gerry Phillips, after the three left Huron Plastics Group in 1999.    More

Image

Tighter resin prices leading to price hike for PE film

August 29, 2014 11:13 am ET

One of North America's largest film makers is pushing through a polyethylene price increase due, in part, to the tight resin market.    More

Polish injection molder Teknorubber up for sale

August 29, 2014 9:14 am ET

Polish plastic parts maker Teknorubber has been put up for sale following its insolvency filing in March 2014. The company is to be auctioned through ...    More

Image

Sidel opens training center in Mexico

August 29, 2014 9:00 am ET

Swiss machinery company Sidel Group has opened a new training center in Guadalajara, Mexico, featuring a virtual factory environment, augmented realit...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events